EVGA

Dark build

Author
bwanaaa
Superclocked Member
  • Total Posts : 183
  • Reward points : 0
  • Joined: 2013/08/01 18:05:47
  • Status: offline
  • Ribbons : 1
2013/09/27 14:32:04 (permalink)
4930k
32 gig kingston ram (KHX24C11T3K4/32X  ) - love that 16 g ram disk
gtx670
corsair h110
seasonic 1000platinum
Nanoxia DS-1
 

Backside showing SSDs held in place by bungee cord laced through the holes of a metal joist strap. The joist strap is held in place by friction and a small pair of L brackets used to mount a fan on the other side.



Corsair H110 placed in front of case after removing all hd bay

Bottom cut out a bit to allow h110 to fit

H110 on the right. One of the Nanoxia fans relocated to cool south bridge and video card


 
140 mm Akasa in front of power supply. Can you tell I am a fan of air filters? My other builds do not even have micro dust after years of use when these are in place.
 
Photos taken w old iPhone.
post edited by bwanaaa - 2013/09/29 07:12:51

Attached Image(s)


EVGA Dark
Intel i7 4930k
EVGA GTC 780 SC ACX
Corsair cmd32gx3m4a 1866 c9 1.6v 32g
Samsung 256 840pro   WD Black 2 gig   LG Bluray
Seasonic Platinum 1000 Corsair H110 Nanoxia DS-1
BIOS 2.07 Win7Pro 4.6 ghz @ 1.36v PLL on vDroop off
Pics:  http://forums.evga.com/tm.aspx?m=2031177#2031177
#1

6 Replies Related Threads

    aka_STEVE_b
    EGC Admin
    • Total Posts : 15974
    • Reward points : 0
    • Joined: 2006/02/26 06:45:46
    • Location: Wouldn't you like to know....
    • Status: offline
    • Ribbons : 59
    Re: Dark build 2013/09/27 14:48:20 (permalink)
    Should be nice.....build on

    AMD RYZEN 9 3900X  12-core cpu~ Gigabyte X570 Aorus Elite board ~ Nvidia RTX 3080 FE~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H80i v2 cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 31.5" monitor 1440 @ 144Hz ~ Win 10 x64 
    ................ GET UP TO A 10% DISCOUNT ON PURCHASES BY CLICKING ....VVVVVVVVV.........


    #2
    XrayMan
    EVGA Forum Moderator
    • Total Posts : 67620
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 110
    Re: Dark build 2013/10/07 22:11:55 (permalink)
     
    Looking good so far.     

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #3
    bcavnaugh
    The Crunchinator
    • Total Posts : 38116
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 276
    Re: Dark build 2013/10/08 07:33:17 (permalink)
    What are those Filters? I have fine Screens but like this idea of filters.
    I have to clean my screens once a week, how often would you need to change your filters?
    Will filters in place what Temps to have and with no filters in place what are your Temps with the same Fan and Pump settings?
    Would get a +1 From me if you had a MODS RIGS.

    Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H  NoDarkSkies


     
    #4
    kubi07
    iCX Member
    • Total Posts : 499
    • Reward points : 0
    • Joined: 2013/06/30 15:31:38
    • Status: offline
    • Ribbons : 0
    Re: Dark build 2013/10/09 11:40:43 (permalink)
    Don't the filters restrict the air flow? Also, how are you liking the case? I heard it's very quiet.

     
    #5
    bwanaaa
    Superclocked Member
    • Total Posts : 183
    • Reward points : 0
    • Joined: 2013/08/01 18:05:47
    • Status: offline
    • Ribbons : 1
    Re: Dark build 2013/10/09 12:08:12 (permalink)
    The filters restricted the airflow when I just put them in front of the stock fans. There was not enough room between the filter and the front door of the case which has sound deadening bitumen. You could hear the fans laboring earlier during a stress test run. After I cut the hole in the floor, the rad sits further back.  In a pull config, the fans are further back from the front of the case. Currently, my iphone sound meter says 35 dB at 1 meter from the side vent with the case on my desk.
     
    Temps are 70 degress with intel burn test. 4.6 ghz 1.38v.
     
    In terms of cleaning-I dont. I just buy a new air filter from home depot (the ones for whole house air conditioners 25x22in) strip off the metal screen and cut to size. My last pc would turn those gray in 6 months. The inside of a 6 year old Q6600 is still pristine.
     
    The case itself has a lot of features that I have no use for-I think I would have been equally well off getting an Arc midi2 and adding sound deadenin material. The chimney on my case remains closed-the exhaust only warms up after a few hours of gaming. I think the big fan in the bottom really helps out keeping temps down.
     
    I thought this was a mods rigs post? How do I 'get a mods rigs'?

    EVGA Dark
    Intel i7 4930k
    EVGA GTC 780 SC ACX
    Corsair cmd32gx3m4a 1866 c9 1.6v 32g
    Samsung 256 840pro   WD Black 2 gig   LG Bluray
    Seasonic Platinum 1000 Corsair H110 Nanoxia DS-1
    BIOS 2.07 Win7Pro 4.6 ghz @ 1.36v PLL on vDroop off
    Pics:  http://forums.evga.com/tm.aspx?m=2031177#2031177
    #6
    kubi07
    iCX Member
    • Total Posts : 499
    • Reward points : 0
    • Joined: 2013/06/30 15:31:38
    • Status: offline
    • Ribbons : 0
    Re: Dark build 2013/10/09 14:36:00 (permalink)
    Go up, and then click "Community" and where it says "Mods Rigs" click on "Build your rig"

     
    #7
    Jump to:
  • Back to Mobile