EVGA

Deadlight: How to remove 30fps cap & enable SLI & Antialiasing

Author
OV3RCLK4
CLASSIFIED Member
  • Total Posts : 4113
  • Reward points : 0
  • Joined: 2008/08/29 14:41:44
  • Location: Tallahassee, FL
  • Status: offline
  • Ribbons : 21
2012/10/25 17:55:16 (permalink)
Update released! Frame cap is now defaulted to 60fps!
To remove the 30fps Frame Cap
Browse to \My Documents\My Games\UnrealEngine3\LOTDGame\Config\LOTDEngine.ini
Find MaxSmoothedFrameRate=30
Change the value to whatever you want  
Note: Multi GPU Users w/ Vsync and a 60hz monitor/tv should use 62 to avoid stuttering.  
 
AMD/ATI Users can enable 8xAA in the control panel
 
For NVIDIA SLI and Antialiasing you are going to need Nvidia Inspector (Download Here)
 
Open Nvidia Inspector and click this button
 
Create a new profile
 
Name it Deadlight
 
Click add application 
 
Add the LOTDgame.exe
 
Copy my settings for Antialiasing Compatibility and SLI Compatibility Bits
Antialiasing - Setting use either [4x Multisampling] or [2x Multisampling]
Antialiasing - Transparency Supersampling use either [4x Sparse Grid Supersampling] or [2x Sparse Grid Supersampling]
You can also enable FXAA if you wish. It is enabled in the settings below.
You may try other Antialiasing settings if you wish but these seem to work the best.
Dont forget to click "Apply Changes" when you are finished.

   
Before

 
After [4x Multisampling and 4x Sparse Grid Supersampling]

 
Tweak at your own risk. Temps can get REALLY hot if you use too much Antialiasing!
 
post edited by OV3RCLK4 - 2012/10/30 16:57:02

Attached Image(s)


Gigabyte X99 SOC Champion
i7 5820K @ 4.6ghz
4x4GB Crucial DDR4 OC to 2667 12-15-15-31
Nvidia 780ti Ref. @ 1325MHz/7.6GHz
Corsair 1200AX Power Supply
Cooler Master Haf X Case
Radiators: GTX 360 Black Ice and MO-RA3
Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
#1

20 Replies Related Threads

    Asetek Im Hit!
    ASETEK Representative
    • Total Posts : 2415
    • Reward points : 0
    • Joined: 2008/09/18 17:52:47
    • Status: offline
    • Ribbons : 4
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/25 18:00:45 (permalink)
    Need I say it?
     
    Smack this kid over the head with the Blue Ribbon Bat of NotBaditol.
     
    Thanks, O!

    i7 5960X OC'd @ 4.5Ghz | ASUS X99-Deluxe | 32Gb Corsair Domi. Plat. 3000MHz | EVGA GTX 1080 Ti FTW3 | 27in Acer GSync 144Hz Monitor @2560x1600  
    Check us out at www.asetek.com
    #2
    willem445
    CLASSIFIED Member
    • Total Posts : 4467
    • Reward points : 0
    • Joined: 2010/05/25 17:30:49
    • Location: Черноруссии
    • Status: offline
    • Ribbons : 13
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/26 05:49:45 (permalink)
    Great guide, never heard of the game before though lol

     
                   
    #3
    Asetek Im Hit!
    ASETEK Representative
    • Total Posts : 2415
    • Reward points : 0
    • Joined: 2008/09/18 17:52:47
    • Status: offline
    • Ribbons : 4
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/26 10:05:26 (permalink)
    it's a great game. I made some tweaks to the profile OV3R did above...no FXAA pushed sparse grid a bit further pushed Ambient Occlusion to high quality too. Game looks great on my 30inch. 
     
    I hopped on at 11pm last night and didn't stop until 2:30. It's Prince of Persia meets The Walking Dead. A lot of fun!

    i7 5960X OC'd @ 4.5Ghz | ASUS X99-Deluxe | 32Gb Corsair Domi. Plat. 3000MHz | EVGA GTX 1080 Ti FTW3 | 27in Acer GSync 144Hz Monitor @2560x1600  
    Check us out at www.asetek.com
    #4
    tet5uo
    CLASSIFIED Member
    • Total Posts : 3540
    • Reward points : 0
    • Joined: 2007/06/30 10:58:34
    • Status: offline
    • Ribbons : 6
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/26 10:27:37 (permalink)
    Im Hit!
      It's Prince of Persia meets The Walking Dead. A lot of fun!

     
    SOLD! 
     
     
    #5
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/26 13:05:29 (permalink)
    Niiice. Im really liking this game too. I also added FXAA and High Quality Ambient Occlusion. The game looks great. I love the old-school side scrolling arcade feel.
     

    post edited by OV3RCLK4 - 2012/10/26 13:21:49

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #6
    y2kcamaross
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2011/06/13 21:41:43
    • Status: offline
    • Ribbons : 0
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 08:48:59 (permalink)
    I set everything exactly like the pictures in nvidia inspector, yet my SLI isn't working and AA isn't working, anyone have any suggestions?
    #7
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 13:54:29 (permalink)
    y2kcamaross

    I set everything exactly like the pictures in nvidia inspector, yet my SLI isn't working and AA isn't working, anyone have any suggestions?

     
    Yea something is wrong. What drivers are you using? I bet if you did a clean install of some recent drivers it should work fine for you. What cards are you using? Also Welcome to the forums I hope we can help.  This thread is getting most of its traffic from Google.

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #8
    y2kcamaross
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2011/06/13 21:41:43
    • Status: offline
    • Ribbons : 0
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 14:06:08 (permalink)
    680 sli with the newest betas(310.xx)
    #9
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 14:12:29 (permalink)
    Go back through the guide again and double check everything. When you get to the end make sure you click Apply Changes at the top right. Somehow I forgot to mention that.

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #10
    y2kcamaross
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2011/06/13 21:41:43
    • Status: offline
    • Ribbons : 0
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 14:17:40 (permalink)
    I'm not braindead, I've hit apply, only thing I did different with these drivers was not do a clean install...but other games changes via inspector are working fine, so I'm not sure if that's the problem or not.  Will reinstall clean and report back
    #11
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 14:24:18 (permalink)
    You never know with some people. I had to ask because i didnt instruct it in the guide. A lot of times people cant turn on their PC so they call up a repair guy and the first thing the repair guy asks is... "Is it plugged in?"
     
    Make sure you do a custom install of Nvidia Drivers and check off "Perform clean install" then go through the guide again. Also you might want to check if there is already a update for Deadlight in your driver because I am using older drivers to do this. 306.02 Beta as of right now. My buddy I'm Hit! has 2x GTX 670 FTW's in SLI and this method worked for him and I believe he is using 310.33 also.
     
     

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #12
    tet5uo
    CLASSIFIED Member
    • Total Posts : 3540
    • Reward points : 0
    • Joined: 2007/06/30 10:58:34
    • Status: offline
    • Ribbons : 6
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 14:42:23 (permalink)
    I've heard that unlocking the FPS cap will actually break the timing of a few of the traps in the game, speeding them up so they're impossible to get by.
    #13
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 15:22:24 (permalink)
    tet5uo

    I've heard that unlocking the FPS cap will actually break the timing of a few of the traps in the game, speeding them up so they're impossible to get by.

    Thanks for letting me know. If I find one of those parts  Ill know to reset it back to 30fps so i can get by it.

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #14
    _Nite_
    Insert Custom Title Here
    • Total Posts : 19183
    • Reward points : 0
    • Joined: 2007/04/18 15:35:04
    • Location: Sumner, Washington
    • Status: offline
    • Ribbons : 46
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 16:52:38 (permalink)
    willem445

    Great guide, never heard of the game before though lol

     


    Gaming Rig: Intel Core i7 2600k @ 4.2Ghz - EVGA Z68 SLI - 16GB Corsair Vengeance DDR3 1600 - 64GB M4 SSD+1TB HD+2TB SSHD - 8GB GTX 1070 SC Black Edition - Asus Xonar DX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
     
    #15
    Asetek Im Hit!
    ASETEK Representative
    • Total Posts : 2415
    • Reward points : 0
    • Joined: 2008/09/18 17:52:47
    • Status: offline
    • Ribbons : 4
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 17:33:28 (permalink)
    OV3RCLK4

    You never know with some people. I had to ask because i didnt instruct it in the guide. A lot of times people cant turn on their PC so they call up a repair guy and the first thing the repair guy asks is... "Is it plugged in?"

    Make sure you do a custom install of Nvidia Drivers and check off "Perform clean install" then go through the guide again. Also you might want to check if there is already a update for Deadlight in your driver because I am using older drivers to do this. 306.02 Beta as of right now. My buddy I'm Hit! has 2x GTX 670 FTW's in SLI and this method worked for him and I believe he is using 310.33 also.



    yes and YES and oh very nice results too! Had to break out the wireless 360 controller.

    i7 5960X OC'd @ 4.5Ghz | ASUS X99-Deluxe | 32Gb Corsair Domi. Plat. 3000MHz | EVGA GTX 1080 Ti FTW3 | 27in Acer GSync 144Hz Monitor @2560x1600  
    Check us out at www.asetek.com
    #16
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/28 23:53:30 (permalink)
    _Nite_

    willem445

    Great guide, never heard of the game before though lol




     
    BAHAHAHAHA That picture is hilarious. Made my night!

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #17
    blacksapphire08
    Omnipotent Enthusiast
    • Total Posts : 8880
    • Reward points : 0
    • Joined: 2010/08/15 18:18:38
    • Status: offline
    • Ribbons : 22
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/29 15:25:11 (permalink)
    Hey i've never heard of this game before either but it looks pretty good. I'll wait for it to go on sale. 

     
    #18
    OV3RCLK4
    CLASSIFIED Member
    • Total Posts : 4113
    • Reward points : 0
    • Joined: 2008/08/29 14:41:44
    • Location: Tallahassee, FL
    • Status: offline
    • Ribbons : 21
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/30 14:23:58 (permalink)
    An update for Deadlight is out and enables 60fps automatically as default.

    Gigabyte X99 SOC Champion
    i7 5820K @ 4.6ghz
    4x4GB Crucial DDR4 OC to 2667 12-15-15-31
    Nvidia 780ti Ref. @ 1325MHz/7.6GHz
    Corsair 1200AX Power Supply
    Cooler Master Haf X Case
    Radiators: GTX 360 Black Ice and MO-RA3
    Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition
    Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
    #19
    tet5uo
    CLASSIFIED Member
    • Total Posts : 3540
    • Reward points : 0
    • Joined: 2007/06/30 10:58:34
    • Status: offline
    • Ribbons : 6
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/30 15:23:56 (permalink)
    That was a quick response. Nice of them.
    #20
    LazyHurricane
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2012/10/31 11:04:17
    • Status: offline
    • Ribbons : 0
    Re:Deadlight: How to remove 30fps cap & enable SLI & Antialiasing 2012/10/31 11:17:09 (permalink)
    good game
    #21
    Jump to:
  • Back to Mobile