I have a the 120-G1-1000-VR, and I ordered a set of of PCIe cables for the 100-CR-1600-B9 on Amazon, totally didn't pay attention to the model number they were for as I only searched for the cables for my PSU, and this was the first listing that came up. Assuming they work with my PSU as far as fitt..
Hello, can anyone shed a light on this? I want to know more about the 100-BV-0500-K1 PSU, or the BV lineup in general. Do they support Haswell C6 and C7 states? Thank you!..
So I have the EVGA SuperNOVA 1000 G2 as well as the pin diagram for it. What I am attempting to do is pull 60watts, or 12 amps off of the 5v rail to power 5M of led lights. Now I'm fairly green with electrical. It is to my understanding that, if I have an output of +5v @ 24A & 120W. Does this me..
Last October I built a computer and used an EVGA 500 W1 80+ white and my computer has started to restart occasionally, but only when I've been playing some slightly more demanding games for a little while, and I have checked every other component and they are all working properly, with the exception..
I'm looking for just a Sata power cable for a G2 power supply. I see they have the cable sets, that include these, but its a bit more than I want to spend when I only need the single cable. I saw the "EVGA 3x SATA Cable (Single) for 650GQ/750GQ/850GQ/1000GQ ONLY" on this site which says it is for GQ..
I have a MSI X470 Gaming Plus MoBo with an 8 pin and 4 pin power connector. The 4 pin is labeled "CPU_PWR2" and nothing on the 8 pin. I built this PC in 2018 and have used an EVGA 550 G3 power supply with only one 4+4 pin "CPU_PWR2" cable plugged in and it has worked fine. I recently ordered an EVGA..
I recently purchased this PSU
Connected everything up, double checked connections. However when it's running I can really hear what can only describe a hard drive frantically searching for something. I.e the read and write heads of a hard drive "clicking" as they do. Or it sounds like..
Hey, I just bought a new EVGA 1200W power supply and can't get it working with the motherboard. I took the motherboard out of the case- nothing plugged into it. If I plug in just the motherboard cable (24 pin), the case fans run and the motherboard. If I plug in the CPU cable to the motherboard, not..
I recently purchased a SuperNOVA 850 G5 to upgrade from a 550 G3 power supply. I would like to know if the cables are interchangeable between those power supplies or will I have to use the cables with the 850 G5?..
I have a request in with support but wanted to poll the community if anyone has had success using Cable Set V2 100-NK-1601-B9 on a G2/P2/T2 PSU. I have a 850 G2 and have issues with the 24pin even after an RMA of the cable set. Stock 24pin included with the PSU, system boots and works fine. Sleeved ..