Adds some Vcore support for XOC on Z590 DARK.EVGA Eleet X1 v126.96.36.199Release Notes:Adds Vcore Override Support for Z590 DARKAllows Vcore to be set higher than 1.72V on the Z590 DARK As always, please leave your feedback and let us know if you run into any issues...
Updates ME for Intel security vulnerabilities. BIOS 1.07 (E599 DARK) / BIOS 1.08 (E597 FTW)
Update ME firmware to 188.8.131.521 v6.1 for Intel security vulnerability.
Windows InstallationDownload the correct .zip file below for your motherboard: 121-RL-E599-KR - EVGA Z590 DARK - v1.07 121-RL-E597..
Anybody ever have the actual POST LED Indicator (seven segment displays) fail? I've never seen this on a motherboard before, but mine seem to be failing. Hard to imagine this being anything but a hardware failure, so I've contacted support, but I thought I'd ask as some of you have been doing this a..
I've discovered another issue with my setup. I seem to be getting spammed with WHEA-Logger warnings in my Windows log. It seems to appear after coming back from stand-by It's doing it on fresh restarts now as well. The PCI Express root port it complains about has my EVGA 3080 FTW3 plugge..
Hello everyone, I just set up this system: EVGA Z590 Dark (1.06) ; intel 11900k/EVGA CLC 280mm ; RTX 3080 FTW3 Ultra ; 32G Corsair Vengeance 3600mhz XMP1 Gear 1 ; WD Black SN850 Gen4/Windows 11 ; Creative AE-7 ; 4 - 4TB WD Black drives. And I am having some kind of issue I cannot figure out. For som..
Anyone else's DIMM voltage being very inconsistent? It's been like this on my original board and the RMA'd board. I haven't tested every increment, obviously, but for example: I set 1.375 and it gets set to 1.408 at restart. Anything between 1.45-1.474 it gets set to 1.485. Once I hit 1.475 it goes ..
I've just about finished a new build, and can't seem to figure out why the K360 isn't spinning up the pump or the CPU fan under the LCD. The radiator fans are turning, but all three report as 0 rpm in the MSI center. No amount of tinkering with the fan curves in MSI Center does anythin..
the bios show's my drives but i can not select the drives in the boot menu. When i use a flash drive with windows repair and go to command prompt and I can get to the C: drive and list the directory. how do i get the mother board to identify the c:drive? Thanks for any help Thorban..
Hey y'all, hope everyone is doing well. I should have some time this week to finally put together my new 590 Dark/11900k PC. So I'm putting together some notes to get everything started and set up at STOCK first so I can get my windows set up and running well, as this is going to be my everyday PC. ..
Hoping someone might have some insight on getting this to work. I have some G.Skill RAM F4-3600C16D-32GTZR (2x16GB) 16-16-16-36 and it won't boot in Gear 1. Setting XMP and 3600, Auto Gear, will boot in Gear 2. I've tried upping VCCIO, settings timings manually, etc. I also tried Command Rate 2 beca..