Hello,

I've been using my hybrid converted 3080 Ti FTW forever but never got to converting the bios. I would like to do it for better fan profiles.

From the post https://forums.evga.com/m.m.aspx?m=3407542&p=1 it looks like there's only one bios. Do I just install it in normal mode? Is there no XOC bios for the hybrid?

Thank you

Yes, flash to normal switch position. 3080 Ti FTW3 cards are shipped with an "XOC" BIOS with a 450W power limit out of the box; simply switch over to the OC BIOS to use it.

Sajin
Yes, flash to normal switch position. 3080 Ti FTW3 cards are shipped with an "XOC" BIOS with a 450W power limit out of the box; simply switch over to the OC BIOS to use it.

Thanks all done! :)

Another question, don't think I should create another post for this.

Do you know the amperage of the existing PWN cable? The default fan header (not the extra side fan header)? I have a push pull setup, and I've been using 2 via the gpu and 2 via the MB. It's been quite annoying to control them seperately so I've used 2 y splitters to connect all 4 to the gpu. Now everything is controlled at once and makes my life easier.

Just curious about the amperage. I think most are 1A, but wanted to double check.

Thank you,
Cheers

Should be at least 1A. If you need to know exactly I would recommend calling evga support to ask them about it.

Sajin
Should be at least 1A. If you need to know exactly I would recommend calling evga support to ask them about it.

Thanks will do!

Cheers