Release: 7/6/2022  -  This release fixes an issue related to LED support for 3090 Ti cards.
 
Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS.  Just a PSA....
 

• Fixes Top View ARGB flickering issue with EVGA GeForce RTX 3090 Ti FTW3 cards

 
https://www.evga.com/precisionx1/
Please let us know if you run into any issues.

Hello EVGATech_LeeM, I replied to the v1.3.3.0, v1.3.4.0 and v1.3.5.0 threads with Issues.  I am glad to see EVGA respond quickly to these problems....so I installed v1.3.6.0 this afternoon, at the start screen on PX1 I noticed 2 things right away, #1 Target, Power was @0 and GPU Temp was @24, #2 Fan Speed, fan 1,2,3 were all set to 88 (left side matching fan speed was given under each fan and RPM).  I raised the power to 100 and GPU Temp to 83, hit apply , then set my Fan curve 35c to 50c fan speed ramping from 45% to 100% respective(all fans linked) highlighted Auto for Fan Speed.  While playing a game(Battlefield 2042) I Alt/Tabbed & the GPU Temp was 63c even though the Fan curve should have had the fans ramp speed @100 as I preset the curve too, Fan 1,2 & 3 still showed 88 under the RPM.  I shut the Auto off, set the fan speed manually and now the fans show the correct speed under RPM set by myself.(I hope you can follow this), I Own a RTX 3090 FTW Ultra
 

Any clue why my main GPU goes crazy on core clock with this version?
 

getalife
Any clue why my main GPU goes crazy on core clock with this version?
 

I have had Issues since v1.3.3.0, my problems were different, I dropped FPS to 20 average.  When v1.3.6.0 dropped I also had similar Issues but due to the preset Target for power/GPU Temp and the fan curve control does not work in Auto, only Manual. Maybe your PX1 is doing this with the GPU clock and voltage causing the crazy problems, Hope this helps ^_^

Apparently in my case if i keep PX1 open instead of minimised it impact the main card performance that use to display by almost 15%... it's crazy.
 
Something is bad coded to took so much resources for a monitoring program.
 
Other things, do they plan to make the program resizable, I mean, depends on resolution you use, this program can took more than the quarter of your screen display

I'll test it once my 3090Ti KP gets here .... UPS now says Monday instead of the original Friday :(

Cool GTX
I'll test it once my 3090Ti KP gets here .... UPS now says Monday instead of the original Friday :(

that information can change at next check point!  keep the faith!

I recently upgraded my monitor to an ASUS VG28UQL1A. I have an EVGA GeForce RTX 2060 SUPER SC ULTRA GAMING card installed. Running 3840 x 2160 resolution, I can connect using HDMI 2.1 and get 60 Hz. I tried to use Display Port 1.4 and the monitor will not switch to it and it returns to the HDMI port. I'm using HDMI 2.1 cables and the supplied DP 1.4 cable. No result switching to DP. The graphics card has two DP connections and I have tried both but no picture on connecting. What can be wrong?

 
Updated

I have not had any issues with any versions on my 3070 Ti FTW3 all fans run good show  and temps run from 36* Idle when load 65*- 68* only Games I run are Red dead redemption 2 with ultra settings 123 fps, Conan exiles all high settings, Fallout 76 high settings and some ultra kind a hehe, 2033 all as high they can go, Division 2 Ultra settings but custom some high 123 fps around there temps stay as mention on all. Think I got good GPU operating well pretty much under all situations.