Hi,
I just installed " EleetX1_1.0.12.0". The software installed a firmware update (MCU...?) and 1.0.13 of EleetX1. I just like to know for what that firmware update was. 
 
- Thanks
 

EVGATech_LeeM
As always, please leave your feedback and let us know if you run into any issues.

I  only changed the RGB of my Z690 with ELEET X1.

After that, I had a BSOD with critical process died. It happened, after setting the software to Default - ended and restarted. It's uninstalled now. I also performed a system reset with a recovery to fully delete the app, and it's kernels. Which seems to be the firmware update, I first asked for.
 

any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

EVGATech_LeeM

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

thanks Lee, hope to see it soon. if y'all want to sell me a z790 while i wait, i'll PM you my CC# lol

zippytek

EVGATech_LeeM

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

thanks Lee, hope to see it soon. if y'all want to sell me a z790 while i wait, i'll PM you my CC# lol

im guessing you tried the 13900k and 13600k and no dice with the z690 yet?

redteamgo

zippytek

EVGATech_LeeM

zippytek
any plans to release a working version for z690 and raptor lake?
 
disappointed to see the new chips launch and evga software support failing us :(

Yes.  I also know at least one new feature they're looking to add in, but not sure about the ETA.

thanks Lee, hope to see it soon. if y'all want to sell me a z790 while i wait, i'll PM you my CC# lol

im guessing you tried the 13900k and 13600k and no dice with the z690 yet?

no i'm trying to hack my way through the few liters i have left w xtu and it is not going well. very annoyed but oh well, i'll play when i'm back from vacation next month 

Is the raptor lake issue that it will only launch as a black screen?  Because that is all ELEETX1 will do for me.  I tried both version 1.0.12 and 1.013, and both will launch, but will not let me do anything with the buttons on the bottom, and only shows a black screen.   I have tried clean installs of ELEET, I have disabled the core isolation and VBS. 

Yes, the frame of the app loads but no error messages and just black inside the app frame. Same for 1.0.12 and 1.0.13

If anyone needs a temporary workaround, xtu will work so long as you have the Intel ME drivers for the board installed. ME needs to be enabled in bios as well

Wasn’t fun but it worked well enough. Managed an 8ghz valid on z690 dark with 13900K:
https://hwbot.org/submiss...3900k_(8p)_8002.23_mhz

zippytek
Yes, the frame of the app loads but no error messages and just black inside the app frame. Same for 1.0.12 and 1.0.13

If anyone needs a temporary workaround, xtu will work so long as you have the Intel ME drivers for the board installed. ME needs to be enabled in bios as well

Wasn’t fun but it worked well enough. Managed an 8ghz valid on z690 dark with 13900K:
https://hwbot.org/submiss...3900k_(8p)_8002.23_mhz

 holy crap! That's awesome!

https://www.youtube.com/watch?v=pXgCGWVZcfQ
 
Seems Lummis version of EleetX1 is working just fine, but we won't have access to his version..