2021/12/31 09:11:09
Dwarfy
Finally got the last piece of the beast today and replaced the stand-in ram I had.
This is my first attempt at hard line tubing, and I enjoyed doing it.

The full specs :-

ThermalTake The Tower 900 Super Tower
Intel Core i9-12900KF
MSI MPG Z690 CARBON WIFI
G.Skill DDR5 6000 C36
1Tb WD Black SN850 M.2
ThermalTake ToughPower GF1 1200W PSU
EVGA 3080Ti FTW

--------------------------
This is old parts from previous build

238GB Samsung SSD 830 series
223GB Patriot Blast SSD
4TB Toshiba HDD
1TB Samsung M.2 SM961
--------------------------

And Some snippits of the Watercooling parts

Bykski B-FTHTJ-L16-WH HardTube Anti-Off 16mm OD compression fitting - White
2 x Alphacool Eisbecher D5 250mm Acetal reservoir incl. 1x Alphacool Eispumpe VPP755 V.3
2 x Alphacool NexXxoS XT45 Full Copper 360mm radiator
Alphacool Eiswasser Crystal Blue premixed coolant 1000ml
Alphacool Eiswasser Crystal Red premixed coolant 1000ml
Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB
Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 FTW3 with Backplate
6 x Arctic P12 fans
 
I didn't use all the water parts I bought
Here is a link to the build pictures for those that are interested https://imgur.com/a/UGe8Lwz
 

All that is left is to connect the screen at the front (need to build a little home for it)
Here is what that will kinda look like from when I had it running previously

 
I hope you've enjoyed looking ;)
Port Royal 13598 https://www.3dmark.com/3dm/70187740?
Time Spy 20216 https://www.3dmark.com/3dm/70187983?
Time Spy Extreme 10221 https://www.3dmark.com/3dm/70188279?
 
 
2021/12/31 09:28:57
nomoss
Very nice!  I love the Tower!
2021/12/31 09:40:28
Bobmitch
Super nice job!
2022/01/01 01:51:30
rjohnson11
This is a great looking rig. 
2022/01/01 04:16:55
Flint 1760
Nicely done, that is a fantastic looking build.  Different angle, double/triple bends are a bear.  Everyone has extra parts left over and they usual come in handy for the next build.
 
 
2022/01/01 12:43:58
thunder-93

2022/01/03 10:34:20
Dwarfy
Thanks for the kinds words peeps.
I really enjoyed the build and although the hard pipe was daunting I didn't rush and had only one really unsalvageable mistake.
The pipe bending took me two days.
 
Even still had to tweak the cpu pump speed yesterday due to it putting too many small bubbles that gathered in the cpu block ;)
 
Even water cooled the i9 is a toastie little number hitting 85 degrees C
The GPU tops out high 50's but usually sub 50 in normal usage.
 
Idle temps right now are 22 GPU and CPU fluctuates in the mid 20's (climbs fast in usage and dips fast once idle)
2022/01/03 11:10:26
Cool GTX
Nice Rig
2022/01/17 21:08:07
XrayMan
 
Good job.    
2022/01/22 11:54:12
notfordman
Nice choice of case to build in. Good job on the tube runs. +1 
Mod rigs is still screwy, can't leave comment. 

Use My Existing Forum Account

Use My Social Media Account