Z590 dark with 10900kf.
I tried 1.0.7 the program just auto closes like unleash rgb does. But 1.0.6 worked, and on default bios settings, eleet x1 says current limit throttling right under the core ratio sliders.
Core voltage setting worked, but core ratio wouldn't apply if it was set higher than 51.
So I went back to bios oc, but some voltages would always be 50 millivolts higher than the values I entered, vdimm, vccio, and another one I can't think of right now.
Vcore voltage does something else. I set 1.35v or anything else really, and tried any ratio higher than 51, the in bios stress tests would ALWAYS have voltage at 1.45v or slightly higher. And in windows the voltage under load would droop about 60 millivolts no matter the vdroop setting applied.
Ratio set at 53 all core in bios, but running a benchmark in windows always dropped cpu down to 5.1ghz, and when cpu load finished it would come back up to 5.3ghz.
I can't figure this z590 board out it seems. Maybe I shouldn't have gone with it to use with two generations of cpu's.