Important: If your motherboard has a setting for CSM, please disable this BEFORE installing this update.
 
The new resizable bar update is here which can bring improved performance to EVGA GeForce 30 series cards. To get the new update all you need to do is download EVGA Precision X1 version 1.1.8.0 or later at www.evga.com/precision
 
Navigate to the "Re-BAR" tab where the latest VBIOS for your card is located:



Click the update button and the correct VBIOS for your card will install, press Y to continue and reboot your PC after installation is complete.
 
Make sure you also have the latest motherboard BIOS and the Re-BAR settings enabled in your motherboard for Resizable BAR to be enabled.

 
More details at www.evga.com/articles/01478/geforce-rtx-30-series-gpu-resizable-bar/
 

Thanks!  It works!

Will this have any impact on power limits if we have the XOC Beta Bios installed?

lindermm
Will this have any impact on power limits if we have the XOC Beta Bios installed?

If you have the XOC it will apply the Resizable BAR version of XOC BIOS.

Hi EVGA_JacobF,
 
I just used the X1 software and flashed my RMAed card that had the newer bios on it from the 3090 email on the OC switch and it is now not showing any video. I switched to the normal bios and I'm getting video. 
 
I have turned off the pc and disconnected power for 30 seconds. The OC bios after updating with X1 is not showing any picture. This was before I was able to enable the re-sizable bar in the software. The motherboard has it set to "auto".
 
What should I do now? Cannot see any picture on the OC bios only normal. 
 
Steps I took to update bios

1. Installed X1
2. It said it needed an update, had to update or I could not get into the software
3. After update, i went to the re-sizable bar tab
4. CLicked on "Update" next to the vbios in the list.
5. It ran the update and said it was successful.
6. It said that I had to reboot. 
7. I rebooted and now no picture on OC bios side.
   1. Normal bios works.

I don't know why but mine isn't working :(. Any help please. Z490-E is updated with REBAR on in the bios also.
 

my screen size in pixels
 

lemmein
I don't know why but mine isn't working :(. Any help please. Z490-E is updated with REBAR on in the bios also.
 

my screen size in pixels
 

Need to check with MB vendor on that one, something not set in BIOS.

InfusionOfFear
Hi EVGA_JacobF,
 
I just used the X1 software and flashed my RMAed card that had the newer bios on it from the 3090 email on the OC switch and it is now not showing any video. I switched to the normal bios and I'm getting video. 
 
I have turned off the pc and disconnected power for 30 seconds. The OC bios after updating with X1 is not showing any picture. This was before I was able to enable the re-sizable bar in the software. The motherboard has it set to "auto".
 
What should I do now? Cannot see any picture on the OC bios only normal. 
 
Steps I took to update bios

1. Installed X1
2. It said it needed an update, had to update or I could not get into the software
3. After update, i went to the re-sizable bar tab
4. CLicked on "Update" next to the vbios in the list.
5. It ran the update and said it was successful.
6. It said that I had to reboot. 
7. I rebooted and now no picture on OC bios side.
   1. Normal bios works.

Try a complete power off (flip off PSU switch) and boot up on OC side.
 

EVGA_JacobF

lemmein
I don't know why but mine isn't working :(. Any help please. Z490-E is updated with REBAR on in the bios also.
 

my screen size in pixels
 

Need to check with MB vendor on that one, something not set in BIOS.

Okay thanks. I'll shoot them an email.

EVGA_JacobF
Try a complete power off (flip off PSU switch) and boot up on OC side.

 
Hi, I just followed those steps, and still no video on the OC bios side. Connected via HDMI if that matters (only have 1 monitor connected).