Nice!

Also has anyone stacked pads on the inductors so that they touch the water block?
 
Thanks,
RJR

Nice but please use temps in Celsius next time.

So how are your temps with this thing on standard loads, like say a single run of Port Royal?  I'd love to compare notes now that I have a HydroCopper block on my Kingpin.

rrusek
Can you please PM me with guide/breakdown video of putting a Bykski water block on a 3080 FTW3 ULTRA.
 
I would PM you but am new to the forum so I do not have enough posts to be able to pm people.
 
Thanks,
RJR

Its less of a breakdown but more of just a light guide. Bascially follow the gamers nexus breakdown then follow the bykski instructions.
 

rrusek
Can anyone confirm that they have or have not used the supplied washer / spacers for the 3080?
 
I have been reading that they are only required for the 3090?
 
Thanks,
RJR

Do not use the spacers for the 3080.
 

rrusek
Also can the supplied thermal pads be used for the installation?  I have read that you need 1mm pads for the vram and 1.5 for everything else.
 
Thanks,
RJR

Of course they can be used, thats what it comes with. They are 1.7 or 1.8 mm.
 

rrusek
Can someone specify what temps you are getting for the memory under load?  I am getting 80c, is that normal?
 
Thanks,
RJR

80c for a air cooled or water cooled? high for air but WAY too high for water. im getting max 120f (48c) with undervolt with 80F (26C) ambient, and thats on a hot day.
 

D3_GX
Nice but please use temps in Celsius next time.

No. Merica.
 

Dabadger84
So how are your temps with this thing on standard loads, like say a single run of Port Royal?  I'd love to compare notes now that I have a HydroCopper block on my Kingpin.

I dont do synthetic benchmarks. I play games. I will say that in the Shadow of the Tomb Raider bench mark this is the result. Stock AVG FPS - 102, Min 80. OC 2160mhz - 106, Min 84. UnderVolt 1890mhz - 100, Min 73.

kikkoman123
 
 

Dabadger84
So how are your temps with this thing on standard loads, like say a single run of Port Royal?  I'd love to compare notes now that I have a HydroCopper block on my Kingpin.

I dont do synthetic benchmarks. I play games. I will say that in the Shadow of the Tomb Raider bench mark this is the result. Stock AVG FPS - 102, Min 80. OC 2160mhz - 106, Min 84. UnderVolt 1890mhz - 100, Min 73.

 
Temperatures mate, not FPS.  Also Port Royal is a great example of how RTX titles would play on a GPU, which is why it's a standard thing folks run to check out their new hardware or new cooling.

Lord Winchester

 
 
 
This is the MP5WORKS Backplatecooler
 

Watercooled backplate. Seems excessive....Now I want one lol

Isn't excessive the whole point of custom loops? :P

kalebg1

Lord Winchester

 
 
 
This is the MP5WORKS Backplatecooler
 

Watercooled backplate. Seems excessive....Now I want one lol

If you're going to put a block on the card, the backside just needs a pad upgrade & some heatsinks as I've shown with my memory Temps.

Dabadger84

kikkoman123
 
 

Dabadger84
So how are your temps with this thing on standard loads, like say a single run of Port Royal?  I'd love to compare notes now that I have a HydroCopper block on my Kingpin.

I dont do synthetic benchmarks. I play games. I will say that in the Shadow of the Tomb Raider bench mark this is the result. Stock AVG FPS - 102, Min 80. OC 2160mhz - 106, Min 84. UnderVolt 1890mhz - 100, Min 73.

 
Temperatures mate, not FPS.  Also Port Royal is a great example of how RTX titles would play on a GPU, which is why it's a standard thing folks run to check out their new hardware or new cooling.

The only thing that really pushes its power level that I play is quake II rtx, 120f max in a hot 80f room