Can one of you help me tweak this kp for 2.2ghz stable with 1k bios?
I can't seem to get it to work, I appreciate any help you can give

I did what I came here to do 🤘🏻

Fastest global Port Royal non ln2.

https://www.3dmark.com/pr/1085472

Edit: added new score, +150
Thanks for all the advice on here. #SWOUP

Congrats!!! 🏆

EvgaUser2711201
Congrats!!! 🏆

Thanks a million man. Tons of good advice on here.

R9 5950X and 3090 Kingpin
15557
https://www.3dmark.com/pr/1090327
 
 

i have a question can the you set limit the voltage on the kingpin bios? i know that the 3090 hybrid bios you cant limit the voltage to 1200. everytime when you limit the voltage to 1200 it auto limit back to 1600. i have to change bak to regular 3090 bios  because it have too much problem

bavor
R9 5950X and 3090 Kingpin
15557
https://www.3dmark.com/pr/1090327
 
 

Nice score, nice temps! How are you cooling the GPU? My best with stock AIO and a 5900x is 15,550 at 2160mhz, card doesn't seem to like boosting above 2160, it just immediately jumps from 2160 to 2205/2220 at next bin offset and I can't get a single run to complete at those clocks, no matter the voltage or temps. Would love to get a run completed even at 2175/2190... could probably break 15,600 but just can't seem to make it happen. Have tried v/f curve with no luck, best runs come from standard offsets without v/f curve.
 
I can hit 15,379 with no voltage changes; that I can only gain another 170pts with added voltage is kind of depressing. Thinking I'm just at the limit of silicon quality, even Kingpins aren't immune.

Well I was able to hit 15,554 at +175 core, +1600 mem with just using afterburner and no advance settings on a 10700k. I went to enable rebar in my BIOS to see if that would change anything and my BIOS wouldn’t post after I rebooted. Had to clear the CMOS and it corrupted my HD and restore point 😫 CPU was still at stock clocks as well. Not really sure what happened there, once I’m off work I’ll reinstall everything and try again.

http://www.3dmark.com/pr/1091151

degenerate
 
Nice score, nice temps! How are you cooling the GPU? My best with stock AIO and a 5900x is 15,550 at 2160mhz, card doesn't seem to like boosting above 2160, it just immediately jumps from 2160 to 2205/2220 at next bin offset and I can't get a single run to complete at those clocks, no matter the voltage or temps. Would love to get a run completed even at 2175/2190... could probably break 15,600 but just can't seem to make it happen. Have tried v/f curve with no luck, best runs come from standard offsets without v/f curve.

 
I bought the Hydro Copper kit when it first became available because I added myself to the notify queue for the 3090 Kingpin Hybrid back in January 2021.  I'm using slightly chilled coolant by taking a spare 280mm radiator, some quick disconnect fittings, and putting the radiator in a cooler with some water and ice.
 

degenerate 
I can hit 15,379 with no voltage changes; that I can only gain another 170pts with added voltage is kind of depressing. Thinking I'm just at the limit of silicon quality, even Kingpins aren't immune.

The kingpins aren't immune from bad silicon.  I sometimes doubt that they are even really binned that selectively or even binned at all based on my experience with two of them so far.  If they are actually binned, someone failed at binning mine.  My 3090 Kingpin Hybrid had the lowest stable overclocked GPU clock speed out of any 3090 I've tested(on stock voltage) between the ones I've owned and the ones I've tested while building systems for other people.  I'd expect it to be one of the best with stock voltage if it was binned.  I know that overclocking ten 3090s isn't a huge sample size, but I really doubt that I was that lucky with nine other 3090s being golden chips that are better over clockers than my Kingpin 3090.  Also my Kingpin 3090 doesn't do well with memory overclocks.  I've seen so many others who can get +1300 to +1600 MHz out of their VRAM with stock cooling(hybrid or hydro copper) and mine struggles to maintain +900 MHz without artifacts and crashes until I resort to chilled water.

rygaul44
So just got done messing around with my KP Hybrid. Without using the 1000w bios and not using the classified tool because I'm still learning about it, I was able to get to 15,176 with my 9900k. I think that's pretty good without the above. GPU peaked at 50C and my ambient was 21C. Hopefully there will be some movement on the HC kit or Optimus finally comes out with their block soon. Can't wait to go custom.

That's pretty standard, the highest I ever got on my 9900K setup was around 15.4K with the card still on the AIO & the CPU in a custom loop setup running at 5GHz.  Sounds about right.