howe10888
Finally broke 15.5K...
https://www.3dmark.com/pr/998018
 

 
 

Sweet! At 52°C average as well. I have to get my average temps down to below 40°C to get anywhere near that.
 
Edit: With LN2 Bios, only using X1

I've only been able to hit 15127 with the classified tool, and I'm pretty power limited.  In face I noticed that when I run at a lower clock boost (+100), my power is pretty steady 550 to 565.
 
I saw someone mention what the dip switches were but they just said "the first second" but looking at it I can't tell which is where.  Is there a reference anywhere?  I'd like to mess with the switches and know what they do.  Oh that's right I was going to rewatch the Vince, Jay and Steve OC2 video to see if they discuss the switches.  

lucidworld

sKutDeath
 Do 2 count? 
 

Of course, comrade
 
Btw, how did Lev's Mexican vacation go? I hope he had fun.
 

 Don't know Lev personally, but maybe doing fine...

16,689 with the 1000w re-bar enabled bios when I messed around w/ it a few days ago. Done pushing it until I have an option beyond ambient cooling.  
 
3dmark.com/pr/992338
 
Any cooling suggestions to invest in while we wait for the hydro copper? Preferably something that would make sense for gaming too -- appreciate any recommendations. 
 
edit: Just realized I could upload the file... whoops

@Christobol
 
Unfortunately, I am unable to reply to PM's still so have to respond to you here.
 
Shorthand answer: Yes, I emailed Vince -- including my full name and serial number -- to receive the 1000w re-bar enabled bios. We didn't discuss if using the bios voided the warranty, although I suspect it may. In addition, they want to ensure it isn't broadly circulated like the previous iteration. 
 
He was remarkably responsive and I'm sure would answer any clarifying questions if you reached out... with your name/sn of course. 

sawtheDEVIL
Man, I finally hit 15000 on the nose after countless periodic attempts since I've had the card in late December. No classified tool, just sliders, ambient of 72F, open case doors with a usb fan blowing across the card. It was the second run tonight, so I forgot to have all the monitoring tools up. I've been under the impression my chip is pedestrian or I just suck at overclocking. Still, feel like I accomplished something!

Hi,
probably, as a lot of people with Zen 3 CPU, our low scores is because of the CPU.
 
https://www.overclock.net/threads/5950x-slower-in-port-royal-benchmark-then-9900k.1774822/
 
https://forums.evga.com/tm.aspx?m=3225016&mpage=1
 
I increased my score by 150 to 200points, by setting my 5900X as follow in Bios :
https://www.overclock.net/threads/official-nvidia-rtx-3090-owners-club.1753930/post-28777788
 
=> All core OC 4.9Ghz
=> SMT disabled
=> 1 CCD disabled
=> Core count 4

djelement
https://www.3dmark.com/pr/974418

Got this with the Galax 1000w bios

Which 1000w Galax bios? Do you happen to have a link? Thanks a million.

Did you have to use a hardware flasher?

One KP Hybrid + one FTW3 Ultra HC: https://www.3dmark.com/pr/1026718
On stock paste and bios as well. Can't wait to see if I can make top 10 by the end of 2021.
 
Here's what my mess of a setup looks like.
 

sawtheDEVIL
Man, I finally hit 15000 on the nose after countless periodic attempts since I've had the card in late December. No classified tool, just sliders, ambient of 72F, open case doors with a usb fan blowing across the card. It was the second run tonight, so I forgot to have all the monitoring tools up. I've been under the impression my chip is pedestrian or I just suck at overclocking. Still, feel like I accomplished something!

Your lucky you can do boost at +175, what are your temps like with that?  The 15000 mark is hard to hit with the 5950X from what I've done with my system so far.
 
What drivers are you running & what settings on the CPU, just PBO?

Spurious_ECG
One KP Hybrid + one FTW3 Ultra HC: https://www.3dmark.com/pr/1026718
On stock paste and bios as well. Can't wait to see if I can make top 10 by the end of 2021.
 
Here's what my mess of a setup looks like.
 

 
Kingpin and FTW3 Ultra can NVLink together? :O