lemuth80

SoldierRBT

lemuth80
https://www.3dmark.com/pr/956480

I got this on 520w bios and little voltage adjustment.

No open window yet

Nice result. Make sure to check effective clocks with thermspy or HWINFO64 when adjusting NVVDD/MSVVD to get the best efficiency possible. Keep an eye on the power limits and stay 5-7W lower so effective clocks don’t drop.

will do. It's an average chip i guess so I'm Happy with that. Memory won't go past 1250 unless i give it some extra voltage

My memory won't go past +1250 even with extra voltage so I feel your pain :-D  I can't get a smidge past +1250 to pass PR, and I don't think I can run much over +1000 at stock voltage for actual stable daily usage, which I guess isn't too bad, but I think that's pretty average for GDDR6X.
I haven't tried to push the memory further since I did all the modifications I've done to improve backplate-side VRAM etc cooling though, will get around to that eventually.

Man, I finally hit 15000 on the nose after countless periodic attempts since I've had the card in late December. No classified tool, just sliders, ambient of 72F, open case doors with a usb fan blowing across the card. It was the second run tonight, so I forgot to have all the monitoring tools up. I've been under the impression my chip is pedestrian or I just suck at overclocking. Still, feel like I accomplished something!

Got a 15304 w/o any tuning of the classified tool. Highest with classified tool is here - https://www.3dmark.com/pr/975095 (15624). Will do more when the waterblock comes out - the voltage I pump in is starting to overwhelm the 360 aio a bit. 
 
Edit : Also got my best tse score yesterday - https://www.3dmark.com/spy/19462175

https://www.3dmark.com/pr/974418

Got this with the Galax 1000w bios

Geez I should count myself lucky. I get 15449 on ln2 bios with no adjustment to dip switches and this is within enclosed case. Average run speed of 2198 mhz. This is just using afterburner

crowie03
Geez I should count myself lucky. I get 15449 on ln2 bios with no adjustment to dip switches and this is within enclosed case. Average run speed of 2198 mhz. This is just using afterburner

I have yet to break past 14850 even when using classified tool

15,520 @70°F ambient room temp, with all fans at 100% : https://www.3dmark.com/pr/996381
 
15,676 @62°F ambient room temp, with all fans at 100%, case panels off, window open : https://www.3dmark.com/pr/996337

 Do 2 count? 
 

sKutDeath
 Do 2 count? 
 

Of course, comrade
 
Btw, how did Lev's Mexican vacation go? I hope he had fun.
 

Finally broke 15.5K...
https://www.3dmark.com/pr/998018