johnksss

degenerate

johnksss

degenerate

johnksss

degenerate

johnksss

degenerate
My card can't break past 2130mhz without crashing no matter what I do, even using classified tool. What a winner!
 
At least now I'll know better when the next Kingpin cards roll out...

What does your card do on memory overclock?

+1325 is max, crashes beyond that. Memory is decent, my core seems very weak.

And that's the 520W bios as well?

Yep LN2 520W. What Classified settings did you use for your 152xx/153xx 4930k scores?

1000W

And no increase in voltages what-so-ever? Just offsets + XOC bios?

I post just before you posted here.
It's pulling 600+ watts at something like 1.2/1.4/1.2
 

Yikes, I can't even get beyond 2130mhz with similar settings in Classified tool using LN2 bios pulling less than 520W.


Regretting keeping this Kingpin! Oh well you win some you lose some.... just think KPE's should have better binning otherwise what's the point.

Seems like I got one of the better ones in terms of stock-voltage core clock OC but one of the worst when it comes to memory OC, I can't go past 1250MHz even with a voltage bump on the memory with Classified Tool, and actually pass runs consistently.

Try something like 1.150/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
520W vbios

Edit-Correction
1.500 should be 1.150V as pointed out later in this thread.

johnksss
Try something like 1.500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
 

No chance my card won't crash at those settings, even if it wanted to run it would probably want to pull more than the 520W LN2 bios allows. I appreciate the help but at this point I've resigned to the fact my card just isn't good. Will just try to enjoy it for gaming and try not to think about it too much.

degenerate

johnksss
Try something like 1.500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
 

No chance my card won't crash at those settings, even if it wanted to run it would probably want to pull more than the 520W LN2 bios allows. I appreciate the help but at this point I've resigned to the fact my card just isn't good. Will just try to enjoy it for gaming and try not to think about it too much.

So you tried those exact settings and your card crashed? I redid the screen shot as i forgot to put the classified tool in.

johnksss

degenerate

johnksss
Try something like 1.500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
 

No chance my card won't crash at those settings, even if it wanted to run it would probably want to pull more than the 520W LN2 bios allows. I appreciate the help but at this point I've resigned to the fact my card just isn't good. Will just try to enjoy it for gaming and try not to think about it too much.

So you tried those exact settings and your card crashed? I redid the screen shot as i forgot to put the classified tool in.

I've tried similar enough settings and done enough testing w/ my card to know it will crash. 1.2/1.36875/1.05 on LN2 with max sliders/fans should be more than enough to complete a run at 2145/2160 but nope, it crashes any time it boosts past 2130. I've tried lowering mem offset with no success. It's the core.


I am running push/pull NF-A12x25's on the radiator and this is with the window open with frigid winter air intake. The card just isn't good.

degenerate

johnksss

degenerate

johnksss
Try something like 1.500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
 

No chance my card won't crash at those settings, even if it wanted to run it would probably want to pull more than the 520W LN2 bios allows. I appreciate the help but at this point I've resigned to the fact my card just isn't good. Will just try to enjoy it for gaming and try not to think about it too much.

So you tried those exact settings and your card crashed? I redid the screen shot as i forgot to put the classified tool in.

I've tried similar enough settings and done enough testing w/ my card to know it will crash. 1.2/1.36875/1.05 on LN2 with max sliders/fans should be more than enough to complete a run at 2145/2160 but nope, it crashes any time it boosts past 2130. I've tried lowering mem offset with no success. It's the core.


I am running push/pull NF-A12x25's on the radiator and this is with the window open with frigid winter air intake. The card just isn't good.

1.2 would have been to much as you would power throttle hard.
 
Okay, no problem. Was debating on buying your card, but you say it's a dud then i'm going to pass on it.

johnksss

degenerate

johnksss

degenerate

johnksss
Try something like 1.500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
 

No chance my card won't crash at those settings, even if it wanted to run it would probably want to pull more than the 520W LN2 bios allows. I appreciate the help but at this point I've resigned to the fact my card just isn't good. Will just try to enjoy it for gaming and try not to think about it too much.

So you tried those exact settings and your card crashed? I redid the screen shot as i forgot to put the classified tool in.

I've tried similar enough settings and done enough testing w/ my card to know it will crash. 1.2/1.36875/1.05 on LN2 with max sliders/fans should be more than enough to complete a run at 2145/2160 but nope, it crashes any time it boosts past 2130. I've tried lowering mem offset with no success. It's the core.


I am running push/pull NF-A12x25's on the radiator and this is with the window open with frigid winter air intake. The card just isn't good.

1.2 would have been to much as you would power throttle hard.
 
Okay, no problem. Was debating on buying your card, but you say it's a dud then i'm going to pass on it.

1.1 was a no-go as well.


You are making the right call, you don't want to buy my card trust me

johnksss
Try something like 1.1500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
520W vbios

Fixed da quote... and wait, shouldn't that be good for 15.4-15.5K?  What drivers is that with?
 
I'm still trying to think of other ways I could possible revive that 400-600pt deficit I'm seeing now.

Dabadger84

johnksss
Try something like 1.1500/1.375/1.100 
+1250 mem
+165 Core
max slider for voltage.
max fans
520W vbios

Fixed da quote... and wait, shouldn't that be good for 15.4-15.5K?  What drivers is that with?
 
I'm still trying to think of other ways I could possible revive that 400-600pt deficit I'm seeing now.

He's running a 4930k rig in order to help test against my own 4930k setup, pretty sure he scores around 15.5k on his main rig.
 
*Edit - lol nevermind just looked at the screenshot and I see that is with 5950x; disregard.