12/20/2020
johnksss
gridironcpj
Strange.  I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz.  I didn't touch the Classified Tool for this run.  Mine is definitely not a lottery winner either.  Far from it.
 
https://www.3dmark.com/3dm/55181212


You can do 15k with no memory offset....
12/20/2020
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
12/20/2020
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.


Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.
12/20/2020
NotoriouS^
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.


Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.




Thank You i will check into that.

Meanwhile, i finally made it into the 15's with x1.

LN2 BIOS
https://www.3dmark.com/pr/663187
 
12/20/2020
gridironcpj
johnksss
gridironcpj
Strange.  I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz.  I didn't touch the Classified Tool for this run.  Mine is definitely not a lottery winner either.  Far from it.
 
https://www.3dmark.com/3dm/55181212


You can do 15k with no memory offset....




Given some of the other scores I've seen for a given set of frequencies, I'm inclined to agree.  However, it just isn't happening with my card.  I rolled back one driver to see if the latest hotfix driver was the issue, but it wasn't.  Here is a result with no memory offset applied.  This is with the LN2 BIOS and a GPU Offset of +105MHz using MSI Afterburner. 
 
Edit: I forgot to link the result lol. https://www.3dmark.com/pr/663166
12/20/2020
johnksss
Here is a run with just core over clocked.
https://www.3dmark.com/pr/663221

Attached Image(s)

12/20/2020
NotoriouS^
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.


Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.


I don't seem to have that in my Afterburner folder in program files directory in the MSIAfterburner config.

When you open afterburner, should it be reading mV? Mine does not
12/20/2020
johnksss
NotoriouS^
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.


Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.


I don't seem to have that in my Afterburner folder in program files directory in the MSIAfterburner config.

When you open afterburner, should it be reading mV? Mine does not


That is what you need to add inside the file VEN_10DEWHATEVERTHERESTSAYS.
You will need to take full access of that file or it wont let you save it.
You then need to insert those two lines I posted, then save. Restart MSIAB and it should show voltage.
12/20/2020
808sting
My ftw3 can barely break 14K using same setup.
 
https://www.3dmark.com/pr/663778
 
LN2 bios with stock card switch settings using PX1.  Going to play some games and burn-in card before I request XOC and use classy.  
12/20/2020
zak00
Can you guys link the XOC VBios and the Classified tool?

Use My Existing Forum Account

Use My Social Media Account

loading