2021/01/28 16:55:31
Dabadger84
Getting DRIVERed, brought to you by NVidia & nicknamed by Vince. lol
2021/01/28 20:01:08
bjohannes1984
15,574
 
https://www.3dmark.com/3dm/57513840?
 
This might be as high as she goes (unless I start doing PR runs in my driveway).
2021/01/28 21:16:46
ice water
bjohannes1984
15,574
 
https://www.3dmark.com/3dm/57513840?
 
This might be as high as she goes (unless I start doing PR runs in my driveway).




Awesome score! Is this the fan run at 100%?
2021/01/29 00:44:55
degenerate
johnksss
degenerate
 

Looks like I was a bit off about the 4930K setup...
https://www.3dmark.com/3dm/57362538




Yeah, my card is a dud.
2021/01/29 02:29:49
Dabadger84
degenerate
 
Yeah, my card is a dud.



If you're running similar clocks to others & not seeing similar scores, like I was, I'd highly recommend mercing your drivers.  I went from the 461.09s to 461.40s, then back to the 457.51s, still got crappy scores, DDUed again, went back to the 461.40s, and finally got 15.4k with clocks that SHOULD be getting 15.4k (2160-2195MHz mostly through the test).
 
The one peaking part where PR is looking down at the ship & you're getting over 100FPS... if your clocks aren't working right and you're aiming for 15.4k, it'll bottom out at like 104-105FPS, if it's working the way it should, it will be way higher than that... I don't remember the exact number mine bottomed out at on that section, but it was several FPS higher.  Wish I'd saved that run instead of just submitting it so I could look at the FPS numbers on it to know what to look for next time.
 
I still have no idea what I actually did to magically go from 14.9k to 15.4k with the exact same clocks etc, but somewhere along the way of repeatedly removing/cleaning & reinstalling different drivers etc, it happened...
2021/01/29 04:36:42
Dabadger84
Asking this in several places: Does anyone/has anyone used a Riser Cable before & had a good quality one they could recommend someone else buy?  I'm seriously considering vertically mounting my Kingpin purely to have it on display because that copper is amazing & it's a shame it can't be seen more. lol
2021/01/29 05:59:38
bjohannes1984
Yeah, triple Noctua F12 3000 RPM fans on the rad in pull, and Noctua F14 3000 RPM blowing directly onto the backplate. Might try push-pull on the rad next (Noctuas pushing, stock fans pulling. These rads seem surprisingly restrictive.
2021/01/29 13:50:00
rome1120

finally broke 15k 
2021/01/29 13:53:22
rome1120
cant upload link for some reason got 15,244
2021/01/29 20:21:48
crowie03
On the OC bios what number should the power slider go to? 
 
Also on LN2 Bios what is the maximum number on the power slider?
 

Use My Existing Forum Account

Use My Social Media Account