@sajin
So after taking another look.... And now it makes since with move all the sliders to the right.
On the 520W vbios.
Enforced Power Limit
EPL=430 / PX1
Max out power target - EPL=511W 
Max out voltage slider - EPL=520W
 
Not sure about 450W vbios as of yet.
 
Edit:
Figured it out. It was user error. The slider was sitting on 120 instead of 121

Fuzzypunks

flyingtoaster85
https://www.3dmark.com/pr/662518

15632

How did you get that Beauty? XOC Bios? What programs were you running at what settings? Temps?

I don't have the XOC bios. I put the AIO radiator into an igloo cooler with dry ice, and put a chunk of dry ice on the backplate. I had the LN2 bios active and both NVVDD dispswitches. It didn't seem to help my temperatures or my score much.
 
Your core and mem speeds are on par with my 15632 run. I wonder why there is such a score difference.

johnksss
@sajin
So after taking another look.... And now it makes since with move all the sliders to the right.
On the 520W vbios.
Enforced Power Limit
EPL=430 / PX1
Max out power target - EPL=511W 
Max out voltage slider - EPL=520W
 
Not sure about 450W vbios as of yet.

Odd. Mine shows different.
 

Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold).  Average clock at 2,160 MHz
https://www.3dmark.com/pr/657718
Using XOC bios and was pulling over 600W
1.2375 NVVDD
1.4 FBVDD
1.2 MSVDD
400/400 NV and MS Freq
LLs 2, and OCPs off
Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset.  That's the next thing to play with.

Sajin

johnksss
@sajin
So after taking another look.... And now it makes since with move all the sliders to the right.
On the 520W vbios.
Enforced Power Limit
EPL=430 / PX1
Max out power target - EPL=511W 
Max out voltage slider - EPL=520W
 
Not sure about 450W vbios as of yet.

Odd. Mine shows different.
 

So then it's only affected when using PX1. That would at least explain some of the power related issues people may be having. Not all of course.
 
Edit:
So I just tried it a few more times and now it's working. I hate when things are not just cut and dry. :(

fragility_V1
Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold).  Average clock at 2,160 MHz
https://www.3dmark.com/pr/657718
Using XOC bios and was pulling over 600W
1.2375 NVVDD
1.4 FBVDD
1.2 MSVDD
400/400 NV and MS Freq
LLs 2, and OCPs off
Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset.  That's the next thing to play with.

What’s your best score with default voltages? It seems like the 1.2+ NVVDD is causing heat throttling.

flyingtoaster85

fragility_V1
Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold).  Average clock at 2,160 MHz
https://www.3dmark.com/pr/657718
Using XOC bios and was pulling over 600W
1.2375 NVVDD
1.4 FBVDD
1.2 MSVDD
400/400 NV and MS Freq
LLs 2, and OCPs off
Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset.  That's the next thing to play with.

What’s your best score with default voltages? It seems like the 1.2+ NVVDD is causing heat throttling.

I was only getting around 14.7K using the OC bios and the the Precision slider maxed.  Was power limited.

Also, that voltage seems pretty high for 15K

johnksss
Also, that voltage seems pretty high for 15K

Oh yah, don't think I won the lottery here.  Wouldn't finish PR on 1.2.

Strange.  I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz.  I didn't touch the Classified Tool for this run.  Mine is definitely not a lottery winner either.  Far from it.
 
https://www.3dmark.com/3dm/55181212