USMC1419
 
I'll give that a try. I offloaded the 3x AIO fans to a controller with SATA power. So the only fan the KP has to power is the internal board fan.
 
Here's the run with +150 / +1000, same settings as before.
 
https://www.3dmark.com/3dm/55284767
 
Not sure if it'll be reaching 15.4k+, but I haven't really started to tweak it much at all with classified because I don't know how.
 

I get ~ same score at 150, too.  GPU runs around 2170 and peaks at 2190 if I remember.  Getting there...

Sajin

USMC1419
Oh, and what does "Both NVVDD switches on" mean? I have the LN2/OC/Norm switch, but are these physical switches?
 
What are some max numbers for NVVDD, FB and MS for classified to not exceed? Always stay on load line 1? And keep on OCP to be safe?
 
I tried searching around google and youtube for pointers on how to do this, and didn't find anything :(

Both on will set nvvdd to 1.15v. For the stock aio max would be 1.2 on nvvdd/msvdd & 1.4 on fbvdd.

I thought without any changes it's supposed to already go up to 1.1v anyway. If each DIP does .25mv shouldn't it be 1.75v without changing anything in classified?

808sting
 
I get ~ same score at 150, too.  GPU runs around 2170 and peaks at 2190 if I remember.  Getting there...

 
Basically spot on what I'm seeing. 2160-2170 avg. run, same peak I think, and +150. I wonder if tweaking NVVDD and others in classified will help it along more.

LVNeptune

Sajin

USMC1419
Oh, and what does "Both NVVDD switches on" mean? I have the LN2/OC/Norm switch, but are these physical switches?

What are some max numbers for NVVDD, FB and MS for classified to not exceed? Always stay on load line 1? And keep on OCP to be safe?

I tried searching around google and youtube for pointers on how to do this, and didn't find anything :(

Both on will set nvvdd to 1.15v. For the stock aio max would be 1.2 on nvvdd/msvdd & 1.4 on fbvdd.

I thought without any changes it's supposed to already go up to 1.1v anyway. If each DIP does .25mv shouldn't it be 1.75v without changing anything in classified?

Can't you set these in classified instead of the switches?

Default clocks and no changes to the voltage slider only allow 1.081. Full voltage slider allows 1.10. Both switches on is 1.15.

USMC1419

808sting
 
I get ~ same score at 150, too.  GPU runs around 2170 and peaks at 2190 if I remember.  Getting there...

 
Basically spot on what I'm seeing. 2160-2170 avg. run, same peak I think, and +150. I wonder if tweaking NVVDD and others in classified will help it along more.

LVNeptune

Sajin

USMC1419
Oh, and what does "Both NVVDD switches on" mean? I have the LN2/OC/Norm switch, but are these physical switches?

What are some max numbers for NVVDD, FB and MS for classified to not exceed? Always stay on load line 1? And keep on OCP to be safe?

I tried searching around google and youtube for pointers on how to do this, and didn't find anything :(

Both on will set nvvdd to 1.15v. For the stock aio max would be 1.2 on nvvdd/msvdd & 1.4 on fbvdd.

I thought without any changes it's supposed to already go up to 1.1v anyway. If each DIP does .25mv shouldn't it be 1.75v without changing anything in classified?

Can't you set these in classified instead of the switches?

Yep.

Thank you Sajin.
 
Any more recommendations you have for tweaking? If crashing at say +175 core, do you add more power to NVVDD to try and get it stable?
 
Any changes to loadline? I'm thinking to just keep OCP on, don't want to play with fire for something I don't know.
 
And if its not a power limit in GPUZ but a VREL and VOP, would this mean you need more voltage for the clock speed?

USMC1419
Thank you Sajin.
 
Any more recommendations you have for tweaking? If crashing at say +175 core, do you add more power to NVVDD to try and get it stable?
 
Any changes to loadline? I'm thinking to just keep OCP on, don't want to play with fire for something I don't know.
 
And if its not a power limit in GPUZ but a VREL and VOP, would this mean you need more voltage for the clock speed?

Yeah, add more nvvdd. Leave on level 1 for both. Keeping ocp on might not let you overvolt the card past a certain voltage, so turning them off is recommended so you know the voltage is actually being applied.

VRel = Cards at the end of its voltage boost table, so it lists voltage reliability as the performance cap.
VOp = Cards hitting the max allowed voltage, so lists operating voltage as the performance cap.

https://www.3dmark.com/3dm/55286438
 
15,187 with +150/+1200... OCP off for NVVDD
 
1.25v
1.4v
1.1v
400
400
 

Sajin

USMC1419
Thank you Sajin.
 
Any more recommendations you have for tweaking? If crashing at say +175 core, do you add more power to NVVDD to try and get it stable?
 
Any changes to loadline? I'm thinking to just keep OCP on, don't want to play with fire for something I don't know.
 
And if its not a power limit in GPUZ but a VREL and VOP, would this mean you need more voltage for the clock speed?

Yeah, add more nvvdd. Leave on level 1 for both. Keeping ocp on might not let you overvolt the card past a certain voltage, so turning them off is recommended so you know the voltage is actually being applied.

VRel = Cards at the end of its voltage boost table, so it lists voltage reliability as the performance cap.
VOp = Cards hitting the max allowed voltage, so lists operating voltage as the performance cap.

 
This is very helpful.

Glad you found it helpful.

https://www.3dmark.com/3dm/55286706
 
15,204. +150 and +1300. Had a little bit of screen flickering. Temps mid 40s. 516W power draw, still hitting vrel vop and vpwr mixed in throughout run. 2163 average clock speed on the core. I wonder if a bit more voltage to the memory would help the flickering. I don't think there's a ton left in it at these settings. Maybe another 100 for both memory and score.
 
Seems like a decent bin. Not bad by any means, but didn't hit gold. Probably slightly limited by CPU combo too.
 
EDIT: So VRel reaching end of voltage boost table, can this be fixed with more NVVDD or do you have to set a table that allows more specifically? I would think the prior?
 
Man I bet she would scream with the XOC.
 
https://www.3dmark.com/3dm/55287450
 
15238