I do not trust him 2 is enough. Asus tuf I trust but not Jacob and sales marketing.

The extra money went toward lipstick and RGB.

Nvidia FE has 2x220 and 2x470 spcap but Evga ftw3 ultra has 4x220 on their board design. Is that make any sense?

yea ill stick with evga here on this, in the instance it becomes a bigger issue, warranty and support is better

Memsar
Nvidia FE has 2x220 and 2x470 spcap/popscap but Evga ftw3 ultra has 4x220 on their board design. Is that make any sense?

where do you see this? those are fairly low SPcaps from what i've seen if that's true.  I really hope some testing is done here, because these numbers seem really low, but idk if that means anything or is perhaps even preferable? or is it simply a cost saving measure

Thanks for the update glad the production cards meet higher qc standards.

Incredible like all people is speaking of a nonsense.
No POSCAP in no one card.
It's like blaming potatoes when it comes to tomatoes.
Parrot retarded people who generalize and talk without knowing in the least what they are talking about.
The problem also occurs on the TUF which have no one SP-CAP on the back of the die but only MLCC  so the problem is elsewhere.
An architectural limit of Ampere is therefore possible, or the 8nm production process that sucks more than it already seemed.

https://www.evga.com/products/product.aspx?pn=10G-P5-3897-KR

There is a photo in this link and if you zoom the back plate you can see the numbers

Memsar
Nvidia FE has 2x220 and 2x470 spcap but Evga ftw3 ultra has 4x220 on their board design. Is that make any sense?

It's ok MSI VENTUS has 6 Sp Caps 220 ;)

https://plecom.imgix.net/...&w=1000&h=1000

Memsar
Nvidia FE has 2x220 and 2x470 spcap but Evga ftw3 ultra has 4x220 on their board design. Is that make any sense?

Plus even the FTW3 ULTRA 3090 has 4x220 so it must run very stable and FE must run higher temps to need larger SP-Caps at 2x470 and 2x220.