This issue has popped up about 3 times over the past 6 weeks or so. It usually happens very early into a gaming session, and only during gaming sessions. I run my GPU for most of the day on [link=mailto:F@H]F@H[/link] and have not had this issue during that or anytime during my typical workday ( I work from home and all of the above is done on this system).
The issue is that for some reason the GPU stops working as an output device and my monitor enters sleep mode. My motherboard does not support internal graphics so I am reliant on the GPU. I am running a 2080 Super FTW3 Hybrid with Fractal Venturi fans on the rad in a push/pull config, mounted at the top front of the case. When the issue occurs the fans ramp up to 100% as the output stops.
Pressing the reset button does not remedy the situation, rather once the reboot sequence finishes I get the D6 Post code for my motherboard, being the "no console output device are found code", and then the POST code display goes back to showing CPU temp. A hard reset of the system fixes the issue.
I am planning on addressing possible issues this weekend, reseating the card, etc., but my knowledge is limited, this being my first build. Is this an indication that there may be an issue with the card itself? Or possibly the riser cable (card is in vertical mount)? Or some other issue? Do I need to contact customer service?
Thanks in advance for any/all replies.
Intel I7-9700K [link=mailto:OC@5.0]OC@5.0[/link]
EVGA FTW z390
EVGA 2080S FTW3 Hybrid (+60/+600)
CLC 280 top mount
G5 750W psu
32GB Corsair LPX 3200
Fractal riser cable
XPG sx8100 boot drive (1TB)
XPG sx8100 game drive (2TB)