Cable Set Version 2 for G2 troubles
Home
Search
To Bottom
EVGA Power Supplies
Cable Set Version 2 for G2 troubles
2020/05/30 14:10:53
1800Allen
I have a request in with support but wanted to poll the community if anyone has had success using Cable Set V2 100-NK-1601-B9 on a G2/P2/T2 PSU. I have a 850 G2 and have issues with the 24pin even after an RMA of the cable set. Stock 24pin included with the PSU, system boots and works fine. Sleeved 24pin from the cable set no POST and power debug LEDs are not all lit (see attached).
i7-7820X
EVGA X299 FTW K
SuperNOVA 850 G2
4x 8GB gskill 3600
980 Hydrocopper
-Allen
Attached Image(s)
2020/05/30 17:09:52
jonkrmr
I just bought and installed both a 1000 P2 power supply and that same sleeved cable kit and it is working just fine for me.
2020/05/30 21:06:24
the_Scarlet_one
1800allen
Push each and every cable into its hole to make sure they are all fully seated properly.
2020/05/31 18:37:24
1800Allen
Maybe just bad luck on my part, I'll give the cables a once over and make sure everything is seated, appreciate the advice.
2020/06/07 17:21:49
1800Allen
No dice, checked and seated pins, all are seated with the same tolerance as the stock cable. Customer service has been super helpful as always but don't think we can fix this one since I don't have the tools to test continuity.
Send to Recycle Bin
Delete Permanently
Latest
Active
Sign up
Log in
Full Ver.
back
Use My Existing Forum Account
Username:
Password:
Log in
Use My Social Media Account