2020/04/03 00:58:20
ASWD123
Hi all,
I received a set of sleeved EVGA PSU cables and they're great, thanks EVGA!
 
I have a spot in a new build for a single SATA power connector to be used for a SSD. The two other connectors in the harness are interfering quite a bit with cable management for this particular location of the SSD. My question is, are there any ill effects by removing the two other SATA connectors and then re-pinning the main line to the upper 1, 2, 3, 4, 5 connector positions? Or for a simpler approach, simply cutting off the wires at the split connector?
 
Thanks for any help!
 
2020/04/03 02:17:14
bob16314
You can remove the extra SATA power connectors however you want and depending how they're connected to the main cable as long as you end up with the correct SATA Power Pinout when you're done.
 
See what my signature says 

SATA Power Cable Mod 
 
2020/04/03 03:05:53
ASWD123
Awesome, thanks for the additional info!
And yeah, your sig definitely rings true 
 
Thanks again!
2020/04/03 04:36:52
bob16314
Sure thing.
 
Welcome to the forums, by the way..Be sure to read the Ultimate Self-Starter Thread For New Members if you haven't yet..Lots of good info there.

Use My Existing Forum Account

Use My Social Media Account