2023/06/06 08:28:30
kim, jonghyun
I'm worried that the motherboard won't get too hot. Is it okay to cover the hole and use it?
2023/06/06 09:30:28
max1024
kim, jonghyun  even LN2 overclocking was done without using VRM water. Direct case fans will be enough.
https://youtu.be/HH26Giq1m6M
https://youtu.be/fvifXb3oXuA
 
2023/06/11 13:16:16
safan80
Where are the bios updates for this board?
2023/06/11 13:52:40
max1024
safan80
Where are the bios updates for this board?

in the same place https://www.evga.com/support/download/
latest BIOS 1.06
https://cdn.evga.com/BIOS...W999_flashtool_106.zip
2023/06/11 14:31:17
safan80
max1024
safan80
Where are the bios updates for this board?

in the same place https://www.evga.com/support/download/
latest BIOS 1.06
https://cdn.evga.com/BIOS...W999_flashtool_106.zip




Thanks. I haven't downloaded bioses for evga boards since the SR-2
2023/11/29 09:35:06
nategee11
I am thinking of getting my hands on one of these still but confused on actual CPU support.
It mentions "Skylake-SP" Xeon CPUs, does that mean my Xeon Gold 6148 would work?  its a Skylake-SP Xeon and works as a single CPU in my Lenovo P920...
2023/11/29 10:47:25
max1024
Yes, this will work on the SR-3. Any Xeon for LGA3647 is ok for it.
nategee11
It mentions "Skylake-SP" Xeon CPUs, does that mean my Xeon Gold 6148 would work? 



2023/11/29 10:48:58
nategee11
max1024
Yes, this will work on the SR-3. Any Xeon for LGA3647 is ok for it.




Thank you, EVGA's very limited "Recommended CPU" list was really getting to me.  :)
2023/11/29 10:53:18
max1024
nategee11 the only issue with your CPU, that you couldn't use DDR4 with highs frequencies like 3866 or 4000 Mhz, only stock DDR4-2666 Mhz. But you can set lower timings like 8-8-8 or 9-9-9 and so on.

 
 
2023/11/29 11:23:39
nategee11
perfectly fine, I think I only have a pile of LRDIMMs at 2666 anyway.  Thanks again!

Use My Existing Forum Account

Use My Social Media Account