Leonardohlb
Can anyone know if it is possible to install arctic accelero III or IV on the 2080ti black?

If I were you'd, I'd put a Hybrid Kit on it but if budget is an issue or you're dead on with that cooler, here's the cooler you're looking for, for your GPU.

Budget is no problem, problem is that in my country does not have these components yet.

Leonardohlb
Budget is no problem, problem is that in my country does not have these components yet.

Which country are we talking about for reference?

GTXJackBauer

Leonardohlb
Budget is no problem, problem is that in my country does not have these components yet.

Which country are we talking about for reference?

Brazil.

Today I did the mod with a Hyper 212x, the result was excellent but I did not like much of the system appearance, so I came back with the original cooler, the EVGA cooler regardless of the amount of thermal grease I use it creates two pockets of air on the sides of the chip, the Hyper 212x had absolute contact in the center of the chip, the cooler of EVGA in 100% ambient temperature of 22º reaches 69º in stock, Hyper 212x reached 53º with OC, I decided to leave the original cooler for a while until deciding what I will, maybe a Kraken G12 with a rad 240mm, 360mm is enough to keep below 50º.


A curisasity is that even the board being limited I can stabilize at 2040/16800 without oscillating clock if the temperature is up to 50º, now I know why EVGA chose new coolers bigger like XC ultra and FTW3, RTX heats much more than the GTX.

bcavnaugh

Leonardohlb
I'm thinking of doing this because I have a 212x left over here.
https://www.youtube.com/watch?v=1-5WEgZhCec
But what about thermal paste the Thermal Grizzly Kryonaut is better than the original thermal paste?

Thermal Grizzly Kryonaut is good Thermal Paste, you will need to test it yourself to see if it is better or not than the OEM Paste
 
 
I highly recommend that you Do Not Do This
 

 

Leonardohlb
Today I did the mod with a Hyper 212x, the result was excellent but I did not like much of the system appearance, so I came back with the original cooler, the EVGA cooler regardless of the amount of thermal grease I use it creates two pockets of air on the sides of the chip, the Hyper 212x had absolute contact in the center of the chip, the cooler of EVGA in 100% ambient temperature of 22º reaches 69º in stock, Hyper 212x reached 53º with OC, I decided to leave the original cooler for a while until deciding what I will, maybe a Kraken G12 with a rad 240mm, 360mm is enough to keep below 50º.


A curisasity is that even the board being limited I can stabilize at 2040/16800 without oscillating clock if the temperature is up to 50º, now I know why EVGA chose new coolers bigger like XC ultra and FTW3, RTX heats much more than the GTX.

Right on. 

23.02.2021 - replacing thermal compound on the Graphics  card will nose loose the warranty.

That is not true.
Is that a virus?  What are you trying to get me to view?

meaning of words "card will nose loose the warranty" is "not lose the warranty"  and EVGA Customer Service Team joke me.
I sent a reply letter asking for an explanation of this answer.