Sajin

veganfanatic

sparetimepc
Here is a video of one of my kingpins pulling 800 watts with a chiller.    https://www.youtube.com/watch?v=_cLxnT97iKc  You have not really said what you want a screen shot of in gpu-z.  Power draw or what ?  Pages 66 and 67 of this thread show a few gpu-z shots of just the main details of the card. 

I would hate to see the power bill playing Halo all day on that card
 

Pretty sure sparetime wouldn’t be running those clocks/voltage all day while gaming as that is a good way to burn your card out.

You would be correct !!!!

flyingtoaster85
I am noticing that some of the results above mine in the Port Royal HOF are with lower core and memory speeds. What’s their secret?

Faster is not always better, you need to find the sweet spot for your card.

Sajin

Pretty sure sparetime wouldn’t be running those clocks/voltage all day while gaming as that is a good way to burn your card out.

Which voltage would that be? Pretty sure Mr DW hit 800~watts at less than 1.2v

Lol. The kingpin does not use 800w when running less than 1.2mv in time spy extreme. When I ran time spy extreme at 1.2mv it would pull in the 600 watt range just for the card itself when running the 2nd graphics test. I was just using the stock aio too.

It was between 1.350 and 1.400v somewhere but not exactly sure just what the exact voltage was.

sparetimepc
It was between 1.350 and 1.400v somewhere but not exactly sure just what the exact voltage was.

oh meh gwad. @DW KPE's at what LLC? 
 
While benching I hang out around 1.2 or less @ambient/sub ambient - 1.3 @ subzero. Guess i'm still addicted to chicken clocking.   
  
My current SLI PR score is about 400~ points below you and those KPE's were at 1.175 LLC 0. With mem at 1.4. HOF #4 I think...
 
Course I also might have better luck if I scrapped the bogus EVGA HC KPE blocks - I think when EVGA applied the term "block" they applied the wrong definition and designed the HC KPE to block flow instead of you know … 

i'm waiting 3090 kpe...

Hi there.
 
Guys, do i have permisson to use NVLink sli bridge between : Evga 2080ti Kingpin  and   2080ti Black Edition?
 
Thank you for your replies...
 

Bepzinky
Any news on the "800W Board Power" bug? It's been happening since a few weeks, every time my card is in idle, it shows 800-830W board power...there was at least one other person reporting the same issue on the forums.

Met with the same behavior recently: OLED display of 2080 Ti Kingpin reports 800w (808 at my case) board power usage when idle and when there is the second GPU card placed in the second PCI-E slot. When at load, the power usage report seems to be actual (100-250w depending of software used).

This was my first kIngpIn and was amazing