Hello i tried updating the firmware for my 2080ti XC Ultra 11G-P4-2383-KB. 
I keep getting an error while trying to run the firmware downloaded. 
 
Error: NV_UCODE_CMD_COMMAND_PREP Failed. 
 
Any suggestions. 
 

Thor2020
Hello i tried updating the firmware for my 2080ti XC Ultra 11G-P4-2383-KB. 
I keep getting an error while trying to run the firmware downloaded. 
 
Error: NV_UCODE_CMD_COMMAND_PREP Failed. 
 
Any suggestions. 
 

https://forums.evga.com/FindPost/2878216
 

Sajin

Thor2020
Hello i tried updating the firmware for my 2080ti XC Ultra 11G-P4-2383-KB. 
I keep getting an error while trying to run the firmware downloaded. 
 
Error: NV_UCODE_CMD_COMMAND_PREP Failed. 
 
Any suggestions. 
 

 

Sajin - mind expanding a bit on what you were proposing out of that thread? I've got a 11G-P4-2282-KR brand new and have run into the exact same problem while trying to flash. Strange the original forum post from EVGA said new cards were shipping with latest bios but I still only see 112% power target max in PX1...which is what led me to try to flash.
 
Not sure if you saw this as well Thor but before the "NV_UCODE_CMD_COMMAND_PREP" error it says something about not having the right version of NVFLASH as well.

dlm12007

Sajin

Thor2020
Hello i tried updating the firmware for my 2080ti XC Ultra 11G-P4-2383-KB. 
I keep getting an error while trying to run the firmware downloaded. 
 
Error: NV_UCODE_CMD_COMMAND_PREP Failed. 
 
Any suggestions. 
 

 

Sajin - mind expanding a bit on what you were proposing out of that thread? I've got a 11G-P4-2282-KR brand new and have run into the exact same problem while trying to flash. Strange the original forum post from EVGA said new cards were shipping with latest bios but I still only see 112% power target max in PX1...which is what led me to try to flash.
 
Not sure if you saw this as well Thor but before the "NV_UCODE_CMD_COMMAND_PREP" error it says something about not having the right version of NVFLASH as well.

Thor2020 may be typing in the commands wrong.
 

The utility runs automatically and then spits out that error...at least in my case so I don't think it's the commands.

dlm12007
The utility runs automatically and then spits out that error...at least in my case so I don't think it's the commands.

I have the exact same issue as you two have with my 11g-p4-2383-kr ultra.

I'm having the exact same issue as multiple people like Thor2020, dlm12007, ppeluso1, etc.
 
My EVGA 2080 Ti XC Black 11G-P4-2282-KR will not update as it spits some error and a message about needing a newer version of NVFlash.
 
I'm clueless as to the link Sajin posted as that seems like just a generic version of NVFlash on it's own rather than having the bios of the EVGA 2080 Ti XC Black 11G-P4-2282-KR built into the NVFlash program like what EVGA provided (OP). Also, the NVFlash in Sajin's link requires all sorts of commands and manual typing whereas the program EVGA linked to here is supposed to automatically install upon double-clicking the file.
 
Can someone please help? I'm having strange issues with my EVGA 2080 Ti XC Black 11G-P4-2282-KR and need to see if updating the bios helps.

Spin5000
I'm having the exact same issue as multiple people like Thor2020, dlm12007, ppeluso1, etc.
 
My EVGA 2080 Ti XC Black 11G-P4-2282-KR will not update as it spits some error and a message about needing a newer version of NVFlash.
 
I'm clueless as to the link Sajin posted as that seems like just a generic version of NVFlash on it's own rather than having the bios of the EVGA 2080 Ti XC Black 11G-P4-2282-KR built into the NVFlash program like what EVGA provided (OP). Also, the NVFlash in Sajin's link requires all sorts of commands and manual typing whereas the program EVGA linked to here is supposed to automatically install upon double-clicking the file.
 
Can someone please help? I'm having strange issues with my EVGA 2080 Ti XC Black 11G-P4-2282-KR and need to see if updating the bios helps.

Contact evga support for assistance... https://www.evga.com/about/contactus/

Is there a firmware update for 11G-P4-2487-KR? Keep getting a weird issue where the card shows some 3 red light just on top of the power connectors and the LED's don't work. Also fans are spinning on full and the Precision X1 shows 0 Watt's.

Moneywaster
Is there a firmware update for 11G-P4-2487-KR? Keep getting a weird issue where the card shows some 3 red light just on top of the power connectors and the LED's don't work. Also fans are spinning on full and the Precision X1 shows 0 Watt's.

sorry for the delay had to remove your post from filter