mo_oniso
How do you all getting up to 200+ watts power consumption? According to hwinfo my 1070ftw never goes above 162w mark. All this while overclocked +75 core and +250 memory (before bios update). Voltage is up to max and power limit also lifted to 112% (this is max i have either on master or slave bios). Temp is not issue: max i got whike stresstesting was 65 with fans at 70%. Am I doing something wrong? At +100 on core 3d mark and heaven crashes only after 10 sec of running.

as you are using the first primary bios, you can switch to the secondary bios and that give you 215w 122% max.
if you have got balls you can flash 1070 zotac amp extreme bios and that will give you ~280w at furmark 1080p no aa without throttling because zotac amp extreme has 300w max.
but in gaming not much differences between these two bios, except bf1 beta...bf1 beta is insanely demanding...
 

If your fans didnt stop even if the temperature is under 60C
I asked the support about that
this is the answer :
Hello,

Thank you for contacting us. The only thing changed was the micron vRAM. No other changes were made. You must have the card set to the secondary BIOS, which doesn't allow for the 0db fan profile.

Try switching it over and see if the fans will stop spinning if the GPU is under 60C.

(I made a mistake by installing the secondary bios on primary, I fixed that an everything is ok now)

@EVGA_JacobF: Is there a way to flash this bios update to a dual-BIOS SLI without removing the cards? I can try directly with nvflash tool if someone advises me about the parameters. (of course,  first update the default bioses and then switch to secondary bioses and repeat). What is the easiest way for us to do it?
 
PS. On the BIOS switch, which one is the bios0 position and which one the bios1? I have to admit I haven't checked the switch until now (1month of usage)

acxcoolerssuck

mo_oniso
How do you all getting up to 200+ watts power consumption? According to hwinfo my 1070ftw never goes above 162w mark. All this while overclocked +75 core and +250 memory (before bios update). Voltage is up to max and power limit also lifted to 112% (this is max i have either on master or slave bios). Temp is not issue: max i got whike stresstesting was 65 with fans at 70%. Am I doing something wrong? At +100 on core 3d mark and heaven crashes only after 10 sec of running.

as you are using the first primary bios, you can switch to the secondary bios and that give you 215w 122% max.
if you have got balls you can flash 1070 zotac amp extreme bios and that will give you ~280w at furmark 1080p no aa without throttling because zotac amp extreme has 300w max.
but in gaming not much differences between these two bios, except bf1 beta...bf1 beta is insanely demanding...
 

I did switch to ln2 (as i thought) slave bios. Nothing changed. Is it possible to have 2 identical bioses? Because it seems like the case

Bios 0(primary) switch is to the left (towards the back of the case)....Bios 1 (secondary) is to the right (towards the front of the case).
There should be no need of pulling the cards....what specific syntax is needed, that I don't know though.

Could someone insert the previous version Dual BIOS
- 08G-P4-6276-KR - EVGA GeForce GTX 1070 FTW ACX 3.0 - Primary and Secondary
After uploading new Bios does not work change the fan speed below 1070 rpm.

Finally, thanks :) GPUZ showing me now
 
 
Did I installed it correctly? First I installed the first bios update and after that I installed the second bios update.

fiv3o
Not sure if anyone else has this with there 1070 ftw but the fans don't shut off in 2d/idle mode (no oc and everything is at stock settings in precision ocx) with this new bios update (main bios). it's not a huge problem as the fans are only at 20%, and can't be lowered in precision ocx (i'm running 6.0.6). Again it's not a huge problem keeps the card even cooler, just though the techs might want to know.

Are you sure you didn't accidentally install the slave BIOS as the primary? 20% fan speed is the base for the secondary ones.

Im still crashing with +250 only

Hi, thanks for posting these.
 
Where he says' ENSURE THE PART NUMBER MATCHES.'
 
Where do I find the part number of my card?