I have two monitors. I've run the bios update as administrator, the update window was on my second monitor (not the main one), everything else was closed. Both monitors flickered and now my second monitor appears to be dead. The update window was gone after this. It's actually the HDMI port that it is connected to, that's not sending any signal to the monitor. GPU-Z is not showing any information about the card's memory. My card is a Micron card. 
 

 
I was only upgrading my EVGA 1070 SC because I could not overclock the memory past 200Mhz without the screen freezing and having flickering all over the screens. I also had flickering without overclocking. I've bought the card on September 30th.
 
Is my card bricked? What should I do? ):
 

Instead of capping at 1.093, my card is capped at 1.081... But a while ago it was 1.093, same temperatures, same power limit. It was like that before flashing as well.
But at least i can OC mu memory up to +530..

Welp, the bios are not card shuffle friendly ... tried to hit my DT with a non-DT bios. :D

i have gtx 1070 superclocked edition with Bios ver [86.04.26.00.70] with micron memory and i can not pass 2200 (+396) without crashing
 

 
would this update work on this bios ?

There is no way anyone could say for sure one way or the other. Many have had much success, others not as much.
You could save your existing bios to flash back to if you aren't satisfied, neh?

 hi Jacob I have an amd system bios wont flash need help please?
 

Really since i bought my first FTW had only frustration...

jboy2206
 hi Jacob I have an amd system bios wont flash need help please?
 

Contact us directly, support@evga.com

Is it fine to flash the bios for Samung RAM users?

Tem4ik
Is it fine to flash the bios for Samung RAM users?

Some have done it without problems. I wouldn't suggest doing it though.
 
Here is what EVGA_JacobF had to say... http://forums.evga.com/FindPost/2565188