2019/02/13 20:46:29
Jeff_G
Okay, good. It showed up as an X on my end.
I'm gonna try a few more things yet tonight, but after a long day I may give up until tomorrow. I'm determined to figure this out now.
2019/03/03 13:22:10
Subroza999
HI Guys , im new in BIOS modding and i have 72.1% asics , i have watercolling on card (evga 980ti sc acx  ;  84.00.32.00.94) (PSU:corsair 750watts , i5 4690k 4.5ghz)
i have question my bios limit is 275W
i want to use Saijin 1420x profile it will fit for me? or it will be to much? and can you reupload please   (and which drivers versions is best ?)
and have you guys any suggestions for me?
2019/03/03 13:53:13
Sajin
Subroza999
HI Guys , im new in BIOS modding and i have 72.1% asics , i have watercolling on card (evga 980ti sc acx  ;  84.00.32.00.94) (PSU:corsair 750watts , i5 4690k 4.5ghz)
i have question my bios limit is 275W
i want to use Saijin 1420x profile it will fit for me? or it will be to much? and can you reupload please   (and which drivers versions is best ?)
and have you guys any suggestions for me?


1420x is still up. You'll need to use older drivers for the vbios to work. Try 353.30.
2019/03/03 22:37:33
Subroza999
Drivers do not support win 10 in discription ,that means i need to install win7? im now on 64win10 or it will anyway run?
Btw thx!!! for youre answers here , in this topic , you make a great job

Attached Image(s)

2019/03/04 00:57:11
Sajin
Yes they should install anyway.
2020/04/01 07:10:06
squall-leonhart
This is how you make the card work
 

2020/05/19 10:35:34
uaolmer
I have evga 980 ti ACX 2.0 - simple, not sc, no backplate.
I installed 1.281 modded bios, tested it and played The Witcher 3 at 1.460-1.470mhz 2050 memory. It's pretty hot 80C 1.29% W. Still, when I played metro exodus it crashed and had to lower it down a bit. Thanks for this opportunity anyways.
It works only with old driver 353 and it seems like the newer drivers have better fps. Is there a way to use newer drivers as I also need g-sync. Newer drivers give me 43 error. I think 364.96 was also working. Thank you
2020/05/19 14:27:24
Sajin
uaolmer
Is there a way to use newer drivers as I also need g-sync.

Nope. If you want 1.281mv you'll need to use older drivers.
2020/05/19 14:43:14
uaolmer
Sajin
 
Nope. If you want 1.281mv you'll need to use older drivers.

I've noticed that I can OC it to 1.243 without bios mod and it can make it past 1400mhz, probably ~1420-1440. Though it requires some tests as I can add only 110%W. The only problem with that is vdroop I guess as the voltage goes quickly down when the card is above 70C and it crashes, though it maybe the lack of power. Well, I think the most perfect solution would be to keep it as is at 1.224-1.243mv but to remove all these problems somehow by vbios alteration. Because with latest driver fps seems to be higher or the same with less clock boost. And the GPU would be less hot and G-Sync would be supported with latest driver. I'm totally new to this but please let me know if it's possible
2020/05/19 15:16:53
Sajin
I could modify the version 1 vbios listed at the beginning of this thread down to 1.243mv, but I don't know if it will work with newer drivers or not.

Use My Existing Forum Account

Use My Social Media Account