2013/11/15 18:11:00
EVGA_JacobF
BIOS 2.01 Updates: 
  • Adds support for Ivy Bridge-E Processors
  • Adds new GUI BIOS interface
  • Various improvements/compatibility updates
 
 

Windows Installation
  • Download the correct .zip file below for your motherboard:
         151-SE-E775-K2/K3 - EVGA X79 SLI
  • Close all open programs
  • Go into the folder where you unzipped this package and run Windows_Update.bat
  • Press any key to continue
  • Click YES when the User Account Control message appears
  • Press Y in to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down after a key is pressed. Then power on again and go into BIOS to setup.
  
USB Flash/DOS Drive Installation 
  • Create a bootable disk.
  • Extract the above .zip file to your bootable disk.
  • From a DOS prompt, run DOS_Update.bat
  • Press Y in to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, shut the system down completely. Then power on again.

After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
 
New GUI BIOS:

2013/11/15 19:19:31
dustingg
Hell YES!!!! finally! thanks Jacob! I'll be testing this out Monday when I get back to work.
2013/11/15 19:34:51
dustingg
Hey Jacob when you were at blizzcon did you check the G-sync displays? If so how was it?
2013/11/15 20:51:53
PCZ123
updated to 2.01
Goes straight to FF (No Post) with a 4930K installed.
Works with the 3820 but not a 4930K.
 
Update:
Noticed I was still on 47.
Flashed again and all is well.
 
 
 
 
 
 
 
2013/11/15 22:36:25
EVGA_JacobF
dustingg
Hey Jacob when you were at blizzcon did you check the G-sync displays? If so how was it?




YES! VERY impressive to say the least.
2013/11/16 09:41:26
dustingg
EVGA_JacobF
dustingg
Hey Jacob when you were at blizzcon did you check the G-sync displays? If so how was it?




YES! VERY impressive to say the least.




How can one get their hands on a DIY kit? I want to get my hands on this so bad!
 
G-sync and Maxwell!!! very exciting times for PCgamers!
2013/11/16 10:41:10
ATGSteakHouse
2.01 Working Great Here - Thanks Jacob
2013/11/16 10:51:45
dustingg
Can any report lower vcores for OC yet? 4.6ghz on bios 47 i have to use at least 1.41 vcore to get 4.6ghz on a 3930k
 
I really hope this bios is a game changer for this old board.
2013/11/16 15:30:54
tonschk
Thank you EVGA for the update
2013/11/17 00:59:53
iamSneaky
ATGSteakHouse
2.01 Working Great Here - Thanks Jacob

lol Even if it was crap you would praise it .... just sayin.

Use My Existing Forum Account

Use My Social Media Account