Updating Marvell Controller Driver For Sata 3

2012/05/30 19:19:42

JLewis187

I use board E767 (X58 Sli3).

Make sure you update the bios of Marvell using Sata 6 ISO Offered by EVGA - 1701 (has to be 1701).
Make sure your bios is under AHCI - IDE causes problems and this driver is not for IDE mode.

The driver you will be using is

Marvell MV-91xx (88SE91xx) Ahci/Raid Controller

Drivers Version 1.2.0.1016 WHQL (Xp/Vista/7)

Download - http://www.station-drivers.com/telechargement/marvell/sata/marvell_91xx_1.2.0.1016whql(www.station-drivers.com).zip

Info - http://www.station-drivers.com/forum/viewtopic.php?f=32&t=3567&p=12943#p12943

Site - http://www.station-drivers.com/page/marvell.htm

Don't download and use 1.2.0.1019 - It's not the most updated, its simply not for your Hardware ID.

Only Download 1.2.0.1016. When You install you will simply extract and Run drvsetup.exe

Restart your computer.

After your computer restarts go to Device Manger - Storage Controllers - Right Click Marvell 91xx SATA 6G Controller and click update - Search Automatically for updated driver software, Make sure it is 100% up to date.

next in Device Manger open System Devices and right click Marvell 91xx Config Device and again click update, Search automatically for the best.

You are now set using the Latest Marvell Sata Controller Driver. Thanks for reading - JL

2012/05/31 01:58:25

Hawaiiboi808

1.2.0.1019 is a little herp derp in my opinion...

2024/11/24 15:00:35

kleinbaas

This helped me so much. Thanks!
I've just installed the pce6sat-m01 SATA card on an old HP dc6700 with Windows XP. It didn't work as XP is no longer supported and it wouldn't find the drivers, but your post pointed me in the right direction and I found the drivers on Station Drivers (look for Marvell MV-91xx/92xx SATA 6G Controller Version 1.2.0.1046 WHQL). Run the setup and restart. All working from there. Thanks again.

Updating Marvell Controller Driver For Sata 3

Use My Existing Forum Account

Use My Social Media Account