fragility_V1

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

That Classy tool does work with the Ti.  Pushed it too high and temps starting dropping clocks.  Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider.
 
Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.

Lol when my window unit went out I bought one just for benching. It's not as good as a window unit for cooling the room but it definitely helps with benching.

tresnugget

fragility_V1

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

That Classy tool does work with the Ti.  Pushed it too high and temps starting dropping clocks.  Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider.
 
Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.

Lol when my window unit went out I bought one just for benching. It's not as good as a window unit for cooling the room but it definitely helps with benching.

Who needs to cool the room.  I'll sit here in a puddle of my sweat as long as that intake air is cool.  Build me one of the Jay-special cardboard shrouds.

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

what vert mount is that and is that an XL or dynamic case?

kraade

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

what vert mount is that and is that an XL or dynamic case?

It's the XL and the Lian Li vertical mount specifically for the XL. I did swap out the riser cable for a 4.0 cable, though.

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

Love the way it looks but those fan colors clash hard with the black, white and silver. :)
 
 

Not heard anything about a 1000w for Ti yet but I would start by trying the strix vbios

https://www.techpowerup.com/vgabios/245448/245448

Looks like I’ll be home tomorrow but delayed delivery until Tuesday. Should have both cards by next Wednesday.

electrosoft

tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk

Haven't gotten the XOC bios yet

Also here's mine in my case

Love the way it looks but those fan colors clash hard with the black, white and silver. :)
 
 

They do. I installed the new uni fan infinitys when I installed the kingpin and realized the RGB cables that come with the Kingpins fans are the same the uni fan controller uses so i just plugged it into there since i was running out of argb headers on the dark and I haven't had time to get play with the RGB (aka probably set it to all red, take a pic, then turn it off). I was going to replace the kingpin fans but after looking up the specs it looks like the uni fans run 100 rpm faster but the ones EVGA uses may be better. Tbh I have no idea, the specs I found were all over the place. Thermaltake and another company both have fans with the same insane model number so I assume they're thermaltake fans with 80+ CFM but couldn't find static pressure specs whereas the uni fans are 61 CFM with 2.66 mmh2o pressure.

tresnugget
*snip*
Also here's mine in my case

That's a slick looking card for sure.. very nice aesthetic. Your build looks great.
 
 
 

zippytek
Not heard anything about a 1000w for Ti yet but I would start by trying the strix vbios

https://www.techpowerup.com/vgabios/245448/245448

Looks like I’ll be home tomorrow but delayed delivery until Tuesday. Should have both cards by next Wednesday.

Looking good Zippy, we will wait with zippy anti si ci pa , say it  say it ... pation 

Nereus

tresnugget
*snip*
Also here's mine in my case

That's a slick looking card for sure.. very nice aesthetic. Your build looks great.
 
 
 

I really appreciate it.

So I did some benching and it's way better than my 3090 KPE but that's not saying much.

At stock gpu with my 12900ks at 5.3/4.2 my PR score was 14.8k

My best score was 15,666 (metal) with +120 on the core hitting 2220 mhz and +700 on the memory
https://www.3dmark.com/pr/1647036

I was having some issues, though. Anything over +120 on the core was rebooting my system, sometimes before I even got into 3dmark and I noticed I was getting pcie whea errors and the CPU error light on the board was lighting up.

I fiddled with the riser cable on the slot side and the hard reboots stopped but I was getting more whea pcie errors and my scores were going down.

I've had issues with the riser cable in the past so tomorrow I'm going to take out the vertical mount and see what happens.