Hello,
 
I have a 3090ti kingpin with the 900w bios (ends with a7) but since I bought the card used I cannot seem to get a hold of the final version of the classified tool.
The tool from the 3090 kingpin does not work with my card.
 
Would anyone have it somewhere on their pc ? I've tried reaching out to evga, kingpincooling, facebook groups, no success :-(
 
Thank you.

Hi Alec101,
 
Welcome to the forums!  I can confirm that EVGA does not support or directly recommend that tool, but if you search online for "kingpin 3.1.7" it seems that there maybe some links from other users.
 
Sorry that we cannot be of further assistance. 

Thank you, however the links aren't working anymore. Without the tool I cannot exceed the cards stock power limit.
 
 
 
Thanks.

Here you go... https://www.mediafire.com/file/9764o27qwe8wswq/Classified.exe/file 

Thank you ! is this the latest version or is there another one, i've been looking all over for this but even with the tool you uploaded my computer sais "device not support"
I don't get it 
 
I have bios version 94.02.A0.00.A7, could you confirm me if this is the right one ?

3.1.7 is the latest one I know of. You may need a different vbios, but that one you listed looks correct.

Are you able to push the card up to 1.2mv using the voltage/frequency curve editor using the .a7 vbios? If no, you might want to give this vbios a try... https://www.techpowerup.com/vgabios/245448/245448

You said you reached out to kingpincooling, but did you send Vince aka Kingpin an e-mail? Vince@kingpincooling.com If no, try that.

Alec101
Thank you ! is this the latest version or is there another one, i've been looking all over for this but even with the tool you uploaded my computer sais "device not support"
I don't get it 
 
I have bios version 94.02.A0.00.A7, could you confirm me if this is the right one ?

"device not support"

Probably a different firmware version/date;  might want to ask Vice, if an updated Classified Tool exists ...
 
 
......... the issue happened when the 3090 KingPin Hydro Copper launched & that was when the last Classy tool update (I've seen) launched
 
  3090 Kingpin  http://kingpinoc.com/doku.php?id=3090
 
 
So, I have no idea if KingPin 3090 Ti is supported by the kingpin 3.1.7  Classified tool as the card launched after that tool was made
 
3090 KP Vs 3090Ti KP
 
@ 13:25 in video, mentions the 3 switches on the back of the PCB. 
Load-line Calibration 1, Mem V & GPU V ...
1 switch On = ~ +25mV & if  2 switches On = ~ +50mV

 
 

Cool GTX
 
......... the issue happened when the 3090 KingPin Hydro Copper launched & that was when the last Classy tool update (I've seen) launched
 
 

Can confirm, back when i first got my 3090 KP swapped over to the HC block i flashed in the vbios for the HC variant and my classy tool wouldn't open. Had to flash the AIO variant vbios back in to get it to work.