er557
Hi @Sajin, sorry to necro this thread but it seems applicable still,
Have two 6183 KR in SLI (1080 SC acx 3.0), on stock clocks and stock settings in XOC. The bioses are updated for the pwm temp fan fix and the nvidia display port fix. I used to run them overclocked but sometimes in games it would reboot so I have set back to stock. They also boost fine but get quite hot up to max temp target, as my ventilation is not top notch.
Would I have any benefit from crossflashing to 11gpbs bios, or to say zotac amp extreme for less power envelope restrictions, or even the asus strix unlocked patched bios with no limits?
I rather stay on the safe side, but have seen guides here that prove those can work. What about my fans and their control, will it be compatible. Maybe I should avoid adventures altogether?

Have you tried flashing the bios? I have a 6183 KR and interested in trying the SC2 bios.

You should proceed vary carefully here, those kinds of things can be unsafe for the card, I haven't yet done it. You may find more usefull info and proof of conecpts in the googling of gtx 1080 owner's club, there is a very lengthy thread elsewhere and it includes evga cards as well.

In GPU-Z my SC2 shows 86.02.39.00.90.  I've run 6583 but it doesnt seem to update to the newest unless I am reading this incorrectly.

KingStyle
In GPU-Z my SC2 shows 86.02.39.00.90.  I've run 6583 but it doesnt seem to update to the newest unless I am reading this incorrectly.

Did you run the .exe as admin?

Sajin

KingStyle
In GPU-Z my SC2 shows 86.02.39.00.90.  I've run 6583 but it doesnt seem to update to the newest unless I am reading this incorrectly.

Did you run the .exe as admin?

Just did and now it’s it’s in low res mode.

When I run it it says adapter then another screen briefly comes up then disappears.

Also my memory in GPU-Z shows 1376 default, do I even need to to this?

KingStyle
Also my memory in GPU-Z shows 1376 default, do I even need to to this?

Not if it's already reading that.

Hello everyone! I try to flash my 1080 FTW2 DT with this bios... the utility runs, emits two beeps and closed. After reboot gpu-z shows old BIOS version and memory clock is 1251. Any ideas?
 

Je Realizze
Hello everyone! I try to flash my 1080 FTW2 DT with this bios... the utility runs, emits two beeps and closed. After reboot gpu-z shows old BIOS version and memory clock is 1251. Any ideas?
 

Did you run it as an admin?

Sajin
Did you run it as an admin?

Of course