after 2.15 update I can only boot after a full shutdown not after a restart at anytime. I get a code d6
 
will work from bios 2.09
 
I have a Nvidia 4070ti and intel i5 13600k 
 
 
Any help would be appreciated
 
BLew

FYI still have the Windows Acitvation issues after BIOS update......

Can someone tell me how the CEP Current Excursion Protection is labeled in the bios? as well as the (ICC Max Unlimited Bit)?
 
I will use Intel Default settings since the Bios Microcode is not working for me. I get a d6 code but if I shutdown my computer completely then boot the computer loads, but not from a restart....
 
I have i5 13600k with 4070ti on Z690 Classified
 
Help please
 
BLew 

It's nothing serious, troubleshoot it In the settings and reboot if it says no Internet connection until it works. It'll return your windows.

I'm still having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
 
BLew

Comeup101$
I'm still having issues after microcode update 2.16, the computer will only boot from a complete shutdown, If I do a restart I get a code d6. I've tried everything I can think of including reinstalling graphics card. I've reinstalled update 3 times still same issue. If I flashback to 2.09 everything works fine. The same issue happened with version 2.12.
2.09 is the only version that works normal. I've worked on this for days and I left a email with tech support but they never responded. My system consist of Nvidia 4070ti, i5 13600k with Z690 Classified along with 64GB Trident Z5 6000 DDR5. I want to be safe I might flashback to 2.09 If I can't figure this out. It feels minor but driving me nuts. Any specific help would really be appreciated.
 
BLew

In this thread, BIOS version 2.16 is for the Kingpin. Do we assume you didn't try flashing the Kingpin BIOS on your Classified?  The newer thread for the latest Intel microcode (0x12b) has BIOS version 2.16 for the Classified. I see you posted a duplicate post in there as well.

I have the right one I didn't download from this thread
Good looking out though, Thx
 
Latest update from other thread
 
Kingpin 2.17
Classified 2.16
 
BLew
 
 

Easy fix. Log back into your Microsoft account which you should've had one. Troubleshoot problem in activation settings in Windows and if it says no network connection restart Windows and try again. Should eventually give you your key back.

boomboom0

EvgaUser2711201
Nice work but what about 14th gen 

For those wondering, I can verify that this BIOS is working with a 14900K.

Was this on a Classified or a KP?
 
Looking to run a 14700k on my Classified becasue its the only board that still likes my SLI setup hoping it works, would love to know before i buy the cpu.

J.Nava

boomboom0

EvgaUser2711201
Nice work but what about 14th gen 

For those wondering, I can verify that this BIOS is working with a 14900K.

Was this on a Classified or a KP?
 
Looking to run a 14700k on my Classified becasue its the only board that still likes my SLI setup hoping it works, would love to know before i buy the cpu.

It should boot on both, but the V/F curves and boost settings may be wrong. not sure what else may or may not be correct. It'll likely treat it like the 13900k. That said, if you set all the OC-settings manually, you can almost definitely get it running stable and pretty decent. It's just not officially supported and the 14700k will not work lol.