The add to cart button for the E1 is gone?

Hi,
 
This was resolved.  
 
https://www.evga.com/products/E1-bare-bones/ 
 

Uhhhklol
The add to cart button for the E1 is gone?

seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount

Any updates on this? Really looking forward to it.

Well, i don't know whom in the product chain did'nt realise that case at that price, won't find a lot of buyers.  I assume it was like a special fashion edition and they not considerate that product has a public wide.
 
So bad at third of that price, everyone will buy it and that will be a flagship instead of limited rare edition, and will compete directly in Corsair/LianLi casing playground!

Fontain616

seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount

Any updates on this? Really looking forward to it.

Yes, making another rev to position the ports to not interfere with the front mounted radiator, as well as adding more Sata SSD mounts

seanronimo

Fontain616

seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount

Any updates on this? Really looking forward to it.

Yes, making another rev to position the ports to not interfere with the front mounted radiator, as well as adding more Sata SSD mounts

Nice! Will we be able to run the distro without the powerboard? I'm willing to run the powerboard if necessary, but I'm really just looking for the distro + D5 mount. The Sata SSDs will certainly be nice to have.
 
FYI: I got my rads in and was able to do a fitment test. They are 48mm thick. When combined with 25mm fans, there's maybe 2-3mm left between the fans and the suspension cables for the top bracket -- at most (there's a little more room in the front); I wouldn't go any thicker on top than 73mm combined.

The Add to cart button is gone again

The Powerboard itself will replace the motherboard tray since there were not enough mounting points.

seanronimo
The Add to cart button is gone again

The Powerboard itself will replace the motherboard tray since there were not enough mounting points.

Gotcha. I was wondering how they were going to go about that, seeing as how there only appear to be 2 holes on the right side. (I wonder what EVGA originally had planned for those...? Note there was a carbon fiber cable shield in the original concept video that didn't make it to production.)
 
Hopefully the process of removing the motherboard tray and taking apart the steel suspension cables isn't too bad.

Fontain616

seanronimo
The Add to cart button is gone again

The Powerboard itself will replace the motherboard tray since there were not enough mounting points.

 
Hopefully the process of removing the motherboard tray and taking apart the steel suspension cables isn't too bad.

The motherboard steel cable grommets can be removed easily, they're screwed on/off.
 
For the cables, EVGA details how these are removed in the manual. The latest rev of the PowerBoard has mounts for 4 SSDs. We're working thru the mounting points for the Distro Block as well as the design of the block now. The block will feature a mount for a D5 or DDC pump.

Update: the design of the PowerBoard is complete. they’re doing leak testing on the distro block.