@EVGATech_LeeM, the situation with my previous post is still affecting me with random BSODs every ten days or so. I’m hoping you can give me some pointers.

I’ve had my 3090 Hybrid for a year and a half in my previous computer. Never installed PX1. The card came with C01F in normal, and C006 in OC positions from the factory.

Fast forward to a month ago, I built a new PC, but against my better judgement, installed PX1 this time, which immediately prompted to “update” the bios to the same C006, which I clicked “yes” in confusion. Ever since, I seem to get random windows crashes every once in a while. I had installed PX1 only to set LEDs to white, and then uninstalled it.

Any ideas if updating the bios to the same version would have caused an issue? First off, as I was on the latest bios from the start, why did PX1 deemed an update was necessary to the same bios version? Is there a way to force another “update” to see if it fixes anything?

I’m not very good in interpreting windows minidump files, but a person that took a look at two of them mentioned “it looks like your graphics card disconnected”.

Thanks

I went back to read the first post of this thread and I noticed that all the XOC bios's are "REBAR" bios's. Does this mean that we would not be able to use CSM mode after flashing one of these "REBAR" bios's on our card? Can we still use CSM / Legacy mode after flashing one of these "REBAR" bioses?

EVGA_Lee

DarkFamiliarity
Got it, so I would be getting this to flash on one of the slots: 4898_XOC_LHR_ovu.zip to get the 450W limit, maintain ReBAR support, and change it to be recognized as a hybrid? Thanks and sorry for the confusion.
 
(To go from 10G-P5-3897-KL to the Hybrid 4898 even though the post says 3898 to 4898)

I updated the link and text for people with either 4898 or 4897 Device ID, such as yours, who want to flash to the HYBRID XOC BIOS.  Grab that one instead.

Any way you have a higher wattage 3090 FTW3 Ultra Gaming bios, please? I have a waterblock on it and am kinda hitting the watt limits on my OC?


Please?

 
 

I have the 3080Ti FTW3 Ultra Hydro Copper GPU.  Question
 
1. Is the bios on the OC switch overclocked?  If so, how would I know it's already overclocked?
2. Does both bios come with the 450 watt limitation?
 
 

Hi guys can someone kindly assist as I am bit lost from the options in the OP (not sure if I am supposed to flash the XOC bios for the liquid cooled version of my card.....). Which one is the latest modded bios for 3080 FTW3 Ultra 10GB to get the most out of the card? Is there any bios that allows for slightly higher temps before the card throttles?

i downloaded the xoc bios 10g-p5-3897-kl but now when i open precison x it constantly reboots can i get some help please 

@  can you assist me?

GaRebelZ718618
@  can you assist me?

I responded to you in the correct (PrecisionX) forum. 

Looking for an xoc bios for 12G-P5-4879-KL
its the EVGA GeForce RTX 3080 12GB FTW3 ULTRA HYDRO COPPER GAMING
 
dont see it listed here