• MODS RIGS
  • PC is finally finished, starting off as a built to order during the shortage. (p.21)
2022/02/04 13:42:03
donta1979
Well made it to the top 30 in the world for my cpu and gpu in 3dmark, have not overclocked the cpu, the ram or given my GPU more volts its still on its stock voltage.
https://cdn.discordapp.com/attachments/822916246487957536/939257177145741362/number30woot.jpg
https://www.3dmark.com/spy/26091405


2022/02/12 23:47:14
donta1979
Well fans changed out, fan/led power hub added.

Ambient Temps around 77-78F maybe a little hotter.

Ambient Temps in office back to 76F with the office exhaust intake filter changed "dogs clog it up good*


Took a bios flash I guess the last one was borked, but still have a slight bow on the lid so core 5 is being a little bit of a pain... Really need to find the right 1mm M4 washers to do the mod.
2022/02/13 01:42:44
rjohnson11
Hopefully you can find the 1mm M4 washer online
2022/02/13 17:18:05
donta1979
rjohnson11
Hopefully you can find the 1mm M4 washer online


I have found a lot but you have to be careful not all are a true 1mm, then you have to get the right width... so it fits perfectly under the socket mount.
 
2022/02/23 22:34:27
donta1979
Well Swapped out six Lian Li Bora ARGB 120mm fans for EK Vardar's as mentioned above. Think I am done until the 40 series. Now just waiting on the Signal RGB to have its big update come out so hopefully their software controls all my LED's. Seems we will need new psu's too and PSU's in general are dropping in price big time.

2022/04/20 20:08:10
donta1979
Well with the upgrade of the Ultrawide 1440p display, I was not able to play CP 2077 on anything below performance or I would hit vram limits, no idea why, or how, or why the fastest cars in that game would get yeeted at DLSS Quality or Balanced at that resolution but it happened. Seems the 3080 12gb at least has stopped that, no idea why. 3% extra cores or the 20% increase in bus speed resulting in more memory bandwidth and an extra 2gb of vram. Or it's a combination of all those things.  Was hitting the 10200 range and hit the max max... normally when that happened FPS tanked to 14fps was not fun. So I have had to play the game in performance since around December of last year.  Both pc’s will need power supplies as they won’t be upgraded again for a long time, to account for wear/degradation and loss of efficiency over the long run. The 1200 will go into my wife’s machine and so guess I will be needing/wanting a titanium 1300w…


System now has an EVGA RTX 3080 12GB FTW3 Ultra boost clock is 2077 without me overclocking. So pretty pleased, no more drops to 14 fps, no more car yeets in Cyberpunk 2077, not exceeding my vram now, also was not expecting a 4-13 FPS depending on the game. 

The last crazy thing my Core i9 12900kf with enhanced Turbo on with some tweaking for a little more speed and my EVGA RTX 3080 FTW3 Ultra also overclocked score I had to work for that put me in number 30 in the world for my config for a time was beaten with the same cpu and the 3080 12gb FTW3 Ultra on both CPU and GPU scores while both stock. 



My wife's PC that was the Veteran on here "just the case" got my 3080 FTW3 Ultra. She was using an EVGA GTX 1080 FTW2. I was sort of rushed on have her pc up and going in two hours. So she got a 2hr build and like 20min worth of cable management. 
2022/04/22 00:21:06
Sleinous
Fantastic build, love it!!
2022/04/24 19:14:37
donta1979
Sleinous
Fantastic build, love it!!


TY much just have one more thing left I want to do, to handle the CPU lid bowing issue. none here or anywhere could not direct me where to get the exact washers I needed that are the correct size as they are labeled. A ton of the washers out that that are the 1mm m4 washers or whatever are not really the size they say they are and a little off... So get to wait for this to come to the USA....



2022/04/25 08:47:19
BiggyNewton
donta1979
Sleinous
Fantastic build, love it!!


TY much just have one more thing left I want to do, to handle the CPU lid bowing issue. none here or anywhere could not direct me where to get the exact washers I needed that are the correct size as they are labeled. A ton of the washers out that that are the 1mm m4 washers or whatever are not really the size they say they are and a little off... So get to wait for this to come to the USA....





Just get the 1mm washers and see for yourself if it affects performance.  I highly doubt the 1mm being slightly off will change anything.
2022/04/25 12:11:23
donta1979
BiggyNewton
donta1979
Sleinous
Fantastic build, love it!!


TY much just have one more thing left I want to do, to handle the CPU lid bowing issue. none here or anywhere could not direct me where to get the exact washers I needed that are the correct size as they are labeled. A ton of the washers out that that are the 1mm m4 washers or whatever are not really the size they say they are and a little off... So get to wait for this to come to the USA....





Just get the 1mm washers and see for yourself if it affects performance.  I highly doubt the 1mm being slightly off will change anything.


It does according to the guy who found out about it and published it. To get my cpu back to its max potential cooling I had I will need the washers to be exact if you do not want your lid bowed at all, or I can just spend 7 bucks when this comes available and call it a day. Plus I do not want to buy a tool I will use once when measuring a bunch of washers. From what I have read people have had to toss out a lot of washers or return the ones they could because they were not exactly the right size they were advertised as.

Use My Existing Forum Account

Use My Social Media Account