1.093 is the max.

Thank you :-)
 
Now i (think i ) am power limited : 227W @2227.5 Mhz (Superposition 4800 Extreme)
The clock drop down in some scenes to 2200 and sometimes also 2150, if i OC to 2100 i have no problem.
 
Is there a way to bypass/change memory limit?
I am already @+1000 but i would like to try to go faster if is possible...
 
Thanks in advance
 
 

Try using precision x1 to increase your memory past +1000.

Sajin
Try using precision x1 to increase your memory past +1000.

Nothing change, limit +1000 also in Precision x1
 
Do you know if there is a modded Bios?
 
 

No there isn't one.

Sajin
Try using precision x1 to increase your memory past +1000.

it doesn't allow me to go past this. Is this with the latest BIOS?

cariacou

Sajin
Try using precision x1 to increase your memory past +1000.

it doesn't allow me to go past this. Is this with the latest BIOS?

On my 2080 ti I can go to +1500 using msi afterburner. With precision x1 I can goto +3000.

Hey Sajin, Excellent guide and responses to users. 
 
Followed and tested your guide about 10 different times now. All setting within nvidia control panel and MSI Afterburner are set to / performance / constant voltage / voltage monitoring etc.
 
Specs:
 
CPU: 9900k 5.0ghz
GPU: 2080 ti Founders
RAM: 32 GB at 2133mhz
PSU: HX 850i
MOBO: ROG MAX CODE X
 
After following the guide. On idle my gpu runs at a perfect 1995 mhz 1.093 v solid 38-40C temp.(Air Cooling GPU)
 
However once I start bench-marking or open any application it immediately drops the voltage below 1.0v.
 
I see the yellow vertical line after configuring to 1.093v. Configured white line to combine with yellow via -1. With leaving mhz as default.
 
Edit : To sum up. Follow guide, Combine white vertical line with yellow vertical line (set at 1.093v). GPU stays at a constant 1.093v. Once I open a benchmark or game the white line reappears at 1.0v then constantly declines then increases. However it never remains constant. The voltage. Once I exit the benchmark or game it immediately defaults back to 1.093v constant.
 
Appreciate the help.
 
Thank You

The reason your voltage is going down is because of your card temp.

While I'm on step 4 of the guide I also get this grey line by my yellow line and my voltage goes to 1.068 (the grey line) instead of 1.093 (yellow line) on my 2080 ti. Why is it doing this?