• Software
  • Windows Updates successes and/or problems thread (p.29)
2019/11/09 13:04:49
Bobmitch
I get a lot of ramping up and down with the fans...but since weather cooled here (North Texas)...nowhere near as much.  CPU idle runs around 22C and full load around 67C.  Using Flow Control 2.0.9
2019/11/09 13:09:42
coolmistry
bobmitch
I get a lot of ramping up and down with the fans...but since weather cooled here (North Texas)...nowhere near as much.  CPU idle runs around 22C and full load around 67C.  Using Flow Control 2.0.9


Here Uk is very cold at 2c but in my house there some heating so My CPU idle at 24 to 26 and full load at 65 to 69 depend in my room temperature!! Your temp is very good low temperature at IDLE 
2019/11/09 13:15:34
Sajin
Gotta love those updates. lol.
2019/11/09 13:21:09
coolmistry
Sajin
Gotta love those updates. lol.


Too scary 


2019/11/09 13:25:31
Bobmitch
Sajin
Gotta love those updates. lol.



Normally they are OK....but the last two or three...not so good.  Wonder if it's a different team or they are just getting sloppy...
2019/11/09 13:26:29
Bobmitch
coolmistry
bobmitch
I get a lot of ramping up and down with the fans...but since weather cooled here (North Texas)...nowhere near as much.  CPU idle runs around 22C and full load around 67C.  Using Flow Control 2.0.9


Here Uk is very cold at 2c but in my house there some heating so My CPU idle at 24 to 26 and full load at 65 to 69 depend in my room temperature!! Your temp is very good low temperature at IDLE 




Yeah...but during the summer when temps outside are 95-100F, my idle is 28-30C and load temps jump to mid 70's.  CPU clocked at 4.6 GHZ
2019/11/09 14:03:11
coolmistry
bobmitch
Sajin
Gotta love those updates. lol.



Normally they are OK....but the last two or three...not so good.  Wonder if it's a different team or they are just getting sloppy...


I am too 
2019/11/09 14:11:41
XrayMan
bobmitch

Windows 10 1903 (18362.449) did it again!!!  My Epson XP-960 printer is no longer listed as a printer in "Printers and Devices" in control panel.  It is listed as "Unspecified"  No matter how many times I clean the drivers and reinstall...it does the same.  Also...my secondary rig (MSI Krait X99 with i7 5820K) is up to the same build and the printer (Epson Artisan 810) is listed the same.  What is Microsoft doing????  Granted...the printer is functional...but ????  Also, my EVGA CLC280 is now CCVI




I prefer HP printers. Had others, but ended up going back to HP. It's working fine.
 
2019/11/09 14:22:09
coolmistry
My is Epson SX200 it really old  but useful. Printer is fine but in Device and Printer not good that icons are missing...
Did you fix this Xray?
2019/11/09 14:25:21
XrayMan
 
Mine is fine. It's got that beautiful green check mark on it too.             

Use My Existing Forum Account

Use My Social Media Account