Crazy!  

Sajin
Two points actually...
 
https://www.3dmark.com/compare/spy/3121247/spy/2523236
 

Well you could have lost two points.

It's like time to get a hybrid cooler for thst kingpin and get it done!

Hybrid cooler isn't going to help here. A card with lower default voltage would help.

Sajin
Hybrid cooler isn't going to help here. A card with lower default voltage would help.

I'll put some money on it, that it will! Haha

My ftw3 sucked hard and didn't want to clock and only had temps reaching 54c tops in benches.. but after slapping a water block it's singing at 2100mhz so far but still need to find time to play around and try for more.

Ram said hello 13k+ and didn't want to do more t hrn 12.5k prior.

Sajin
Max temps compared between old & new card after 15 minute stress test...
 
OLD:

 
NEW:

 
Note: Rooms temps were exactly the same for each test.
 
 

Is this With or Without using the LN2 Bios you used on your order card?

bcavnaugh

Sajin
Max temps compared between old & new card after 15 minute stress test...
 
OLD:

 
NEW:

 
Note: Rooms temps were exactly the same for each test.
 
 

Is this With or Without using the LN2 Bios you used on your order card?

Both were running on the extreme oc vbios loaded to the ln2 switch.

damn! im jealous

Viper453
What temps and clocks you guys getting with the hydro-copper version?

Sorry to raise the dead on this post... just wanted to respond.  I haven't overclocked mine besides the default precision boost.  The card is sitting at 2012Mhz and under a 100% GPU load temps max out and equalize at 44c.  Custom loop with a 280mm and 360mm radiator, CPU and GPU on the same loop.

Sajin

bcavnaugh

Sajin
Max temps compared between old & new card after 15 minute stress test...
 
OLD:

 
NEW:

 
Note: Rooms temps were exactly the same for each test.
 
 

Is this With or Without using the LN2 Bios you used on your order card?

Both were running on the extreme oc vbios loaded to the ln2 switch.

Sajin, what happened with your K|NGP|N, why you send to technical support?
Instability or some other problem?