escannihilator
sent you a message about lights and yes there is lots of room behind the mb side.....
 

Well i took your advice on the LED's and i ordered the case lol
got a FREE 600W PSU with a case , so now i got a spare lol

Let me know what you all think
 
Well I did get my case the next day witch would of been the 6th but ran into some issues caused by me lol here are some pictures
I didn't get no pictures when I took it our of the box cause I misplace the cam lol
but here are a few
 

 
here is a few pictures of the Other case that I replaced with this ,It was a good move
 

 

 
the Left Side
 

 
I/O

 
Right Side
 

 
Wife did the wire management , think she did good for the 1st time
 

 
Temp inside the case
 

 
and finally the Front

XRogerX
Thinking about getting the DG-86 to Replace my Phanteks Pro ,but will be looking for some nice Red LEDs , anyone know where to get some
anyways how much room is there in back of the mobo tray ,cause with the Phanteks pro there is about i think 1inch back there ,so if it has about that much with the DG-86 then I'm sold
Thanks Roger

For leds i purchased this... https://www.newegg.com/Product/Product.aspx?Item=N82E16811980001
good price, colors are good and bright. they are magnetic.
comes with 2 strips, but found one was bright enough.
Installed the strip in place of the original.  Worked well.
Good Luck !

Here's mine. I must admit. I like the case a lot. The only thing I didn't like was removing the top. One of the plastic pieces that hold it to the case was broken when it arrived. When I took it out of the box it shipped I heard something rattling around inside. One of the plastic pieces had been broken. Kind of a bummer my new case was broken before I ever got to use it. :(.

--DG-87, it looks like a heater!!! (What do I know... I'm just a designer ^^)
 
Depends... enjoy your new case! ^^

Very cool case!

Hello all I am new to the EVGA Case thing can you all let me know what its like as far as airflow, ease of building in them and cable management?  Thanks.

Gam3r26
Hello all I am new to the EVGA Case thing can you all let me know what its like as far as airflow, ease of building in them and cable management?  Thanks.

That's a professional review of it: https://www.youtube.com/watch?v=ytysz4sf3EY

I finally got around to transferring my pc to new DG-87  was impressed at all the different ways I could of went about it sorry pics are not much good time for new camera




pics don't do it justice s6 would probably take better pics gonna for new camera had a heck of time getting new res stop leaking finally got it lights are very bright but not to bad will update modrig to.
notice my rad has some bent fins it's fairly new not sure how that happen it's a 360 thick that almost caused major problem was able to offset the res to make up for it so probably wont to go with thinner rad for this case it's built very well they thought of almost everything