jassilamba
Here is the build that I did in mine. 
 

 

Love it!
 
Is there a build log for this? Nice work!

I would be interested in getting a basment devider like that.

Work in progress, just switched from a NZXT Switch 810 (pun intended) A more appropriate top radiator incoming. Currently;
i5 4690k @ 4.8GHz; EK Supremacy
2x R9-290 @ 1150/1375Mhz; EK Supremacy VGA
Crucial DDR3 @ 2200/10-10-10-28
Alphacool 420x60 right radiator (push/pull)
Alphacool 240x60 top radiator (pull) (switching to 360x45 push/pull)
D5 pump; EK X-Top
1/2"x3/4" tubing



 

DG-87 look very cool in your room.
I wish that case more and more. Really case as I need.  
Price in USA is not disaster, normal price. 
DG-87 is really capable to change your plans and if someone thought to build smaller PC could easy to change that and stay with
E-ATX form factor thanks to this case.  It's really refresh for market and models we look every day.

Enzarch
(switching to 360x45 push/pull)
 

The case will not support a 45mm rad in push/pull on top, needs to be 30mm for push/pull. that or you'll have to use low profile fans and they are not good for radiators.

Chris21010

Enzarch
(switching to 360x45 push/pull)
 

The case will not support a 45mm rad in push/pull on top, needs to be 30mm for push/pull. that or you'll have to use low profile fans and they are not good for radiators.

The case will, easily, many motherboards will not, I have very carefully measured, and mock test fit, it clears fine, albeit quite snug. However I haven't finalized yet, I may use a 30mm as I don't want to screw myself for future builds. Or I might not change anything, having top access is kinda nice. And if I go 30mm I can probably fit a 420x30, though a have not confirmed this.

OH, you are going with a 360 and not a 420 so you can pull it toward the case window and away from the motherboard to allow it to pass in front of the motherboard?

Chris21010
OH, you are going with a 360 and not a 420 so you can pull it toward the case window and away from the motherboard to allow it to pass in front of the motherboard?

Correct, still may go with 30mm to prevent future issues. Although the 360x45 would mean the front and top fans would almost perfectly meet edge to edge, and that very appealing to me.

jassilamba, What was the size of the plexi you used? And how did you mount it? PLEASE!!!!!!!

FINISHED!!!!