Where can I get firmware update for my EVGA GTX680 2GB which support UEFI drivers?
The part number of my card is: 02G-P4-2680-KR . Also just for your information I have ASUS P9X79 Pro motherboard.
 
Please help.
 
Thank you in advance!

Register the card here then e-mail me at mattm@evga.com with the serial number and I can e-mail you the firmware.
 
Please note that once flashed it will not work with non-UEFI motherboards and is only required for Secure Boot with Windows 8.

Thanks a lot for your quick reply. I need to ask you one question even though I know it is stupid. Where can I get the serial number of my card without disassembling my computer? I cannot register without the serial number. I tried GPU-Z and Precision X, non of them are providing me with the serial number.
 
I don't know if this information is enough but just in case the part number of my card is: 02G-P4-2680-KR and the gpu is GK104 rev A2 and the current bios version is: 80.04.09.00.80 (p2002-0000)
 

It is on the back of the box below a window.  It will not be in the firmware.  Unfortunately, if you don't have the box you will have to look at the sticker on the card on the opposite side of the PCB from the heatsink.

Thanks for the reply. Ok, I will disassemble the computer, get the serial, register it and then I will be waiting for the new firmware.
 
Thanks you very much for your help !

You are welcome. Make sure you e-mail me the serial number to send the firmware.  You can probably see the sticker by just removing the side panel.  You can take a picture with your phone and look at it that way to make it easier as well.

Dear Matt,
 
Just to let you know that I got the serial number from the card and did register. Where am I going to receive the firmware update? via e-mail?
 
Thanks.

I have received your e-mail and I have attached it to my response.

I've emailed you as well Matt - hopefully you are able to help me as well to get secureboot happy.

E-mailed the firmware.