Ok, long time Folder,short time Cruncher. With that said I'll be splitting machines between the 2 and look in to the Folding and crunching on the same machine at the same time. Big on GPUS light on CPU power, we'll see if they can handle the heat and go from there. Thanks for letting me run with you in the latest challenge!!!!

Welcome howdy2u2,

I'm the same way. Quad core only with 2 gpus. Remember that every point counts, it was a hard lesson for me. I'm almost always in the bottom of the charts on CPU only projects, but being on this great team helps alot.

hello i am reporting and how do i find person of the day
 

Welcome to the Forum cdog499e and to a Great BOINC Team!
This is where you go to setup a BOINC Banner http://signature.statseb.fr/
User Of The Day http://www.uotd.org/ You need to setup a User Profile on Each Project you run on to get a UOTD Count.

So today is my first day of crunching. I believe it is set up ok. Under "Projects Tab" it states Team is [link=mailto:Crunching@EVGA]Crunching@EVGA[/link].
First question. Can someone please verify this? Thanks. I just want to make sure my credit is going to the team.
 
Next up is my system. I have a SR-2 mobo with 2 x5680's oc'd to 4.2 ghz. HT currently disabled therefore 12 cores are Cool running, and low power consumption. This board also folds with 2 1080's.
Second question: Will it make crunching crazy fast to enable HT to get 24 threads? I was reading some of the forum stuff per "You should Keep HT Enabled (On) for Sieve Projects and Disabled (Off) for LLR Projects" and started to get a bleed nose, lol. I am currently on the World Community Grid project.
 
Thanks team.
 

turbomadman
So today is my first day of crunching. I believe it is set up ok. Under "Projects Tab" it states Team is [link=mailto:Crunching@EVGA]Crunching@EVGA[/link].
First question. Can someone please verify this? Thanks. I just want to make sure my credit is going to the team.
 
Next up is my system. I have a SR-2 mobo with 2 x5680's oc'd to 4.2 ghz. HT currently disabled therefore 12 cores are Cool running, and low power consumption. This board also folds with 2 1080's.
Second question: Will it make crunching crazy fast to enable HT to get 24 threads? I was reading some of the forum stuff per "You should Keep HT Enabled (On) for Sieve Projects and Disabled (Off) for LLR Projects" and started to get a bleed nose, lol. I am currently on the World Community Grid project.
 
Thanks team.

http://stats.free-dc.org/stats.php?page=userbycpid&cpid=2bb9365ca4e92b90e44b360f3d27050e
turbomadman BOINC Cross Project IDentifier 2bb9365ca4e92b90e44b360f3d27050e
But you will need to wait 24 hours before you will see your Points. MAKE NO CHANGES
 
http://boincstats.com/en/stats/-1/user/detail/4369510 Your ID 4369510
 
Correct:
HT Enabled (On) for Sieve Projects and Disabled (Off) for LLR Projects for PrimeGrid CPU Projects.
For World Community Grid Projects HT Enabled (On)
 
Create a Forum account so you can setup Free-DC http://www.free-dc.org/forum.php
http://stats.free-dc.org/stats.php?page=userbycpid&cpid=2bb9365ca4e92b90e44b360f3d27050e
 
Once setup use Statstool Config to add your Projects. After you add your Projects ID's to the Projects that you are running you MUST Exit the Browser and then wait for 24 Hours and also for the Points or Credits to collect.
 
You will have to Joint our Team Crunching@EVGA on Each BOINC Project that you sign up for.
Some of us use BAM! https://boincstats.com/en/bam/ to manage our Projects as well as Join Project through BAM! so you could start here as well and setup a Profile and so on. Take your Time and Read around (Play Around) with BAM! and Free-DC.
 
Last as posted in the above Post:
User Of The Day http://www.uotd.org/ You need to setup a User Profile on Each Project you run on to get a UOTD Count.

turbomadman
So today is my first day of crunching. I believe it is set up ok. Under "Projects Tab" it states Team is [link=mailto:Crunching@EVGA]Crunching@EVGA[/link].
First question. Can someone please verify this? Thanks. I just want to make sure my credit is going to the team.
 
Next up is my system. I have a SR-2 mobo with 2 x5680's oc'd to 4.2 ghz. HT currently disabled therefore 12 cores are Cool running, and low power consumption. This board also folds with 2 1080's.
Second question: Will it make crunching crazy fast to enable HT to get 24 threads? I was reading some of the forum stuff per "You should Keep HT Enabled (On) for Sieve Projects and Disabled (Off) for LLR Projects" and started to get a bleed nose, lol. I am currently on the World Community Grid project.
 
Thanks team.
 

Ummm no pressure but....................we could use your help on the PG (Prime Grid) Challenge, that is if your interested.
http://www.primegrid.com/ 
 
It's actually pretty interesting if your into numbers-primes-  Any Who WELCOME!!! It is for me at least as addicting as Folding....................

Welcome and thank you!

Thanks bc for the great info as usual. I'll do some reading. You and the others always at 110%.
Thanks howdy. I'll try and do some research on the prime at a later time.
Thanks for the warm greetings everyone. 

If you are going to Fold and Crunch, be sure to leave a free CPU core per GPU.
otherwise the Folding PPD will be reduce by a lot.
 
You need to configure Boinc to use 90% of the CPU
Options tab, Computing Preferences, Computing Tab, Usage Limits, Use at most xx% of the cpu's