gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Hello, last week I updated my Windows10.
I just clicked shut "down and update" before I sleep. Next 3-4 days I did not open and today I tried to open it and did not open. I mean computer starts normal but does not give any response to USB (keyboard,mouse) and monitor.
I switched keyboard and mouse to unrecognized usb slots this time computer opened but I seen a message like can not start windows10 (damaged etc.) That said put a install or repair usb so I did and restart this time again It did not give response. I switched to unrecognized ones restarted and again not started later so all usb are recognized and I cant open computer any way. I even switched bios or reseted a bios too! There is no damage to any device I am sure. This kind of thing happened after updating windows10 and I re-installed windows and saved it but at this time again updated and same thing happen again. If I fix this issue I may change operating system.
What should I do to open it ? What is the reason of this mysterious issue ?
System info: z370,gtx108hybrid,cpu and gpu liquid cooled,16gb ram, samsung m2 drive.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Windows10 update and a new problem
2019/10/10 14:01:35
(permalink)
☼ Best Answerby gomidas 2019/10/10 14:05:31
Gotta love windows updates that nuke your system. Sounds like you need to reinstall windows again, and then disable windows updates completely to fix the problem.
|
gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Re: Windows10 update and a new problem
2019/10/10 14:06:15
(permalink)
yes i know but i can not get the mouse or caps lock light. Monitor does not give blue light i se orange light. So what should i do remove the os installed drive ????
|
KenMcC
CLASSIFIED Member
- Total Posts : 3329
- Reward points : 0
- Joined: 2010/07/02 07:02:23
- Location: Garland, TX
- Status: offline
- Ribbons : 21
Re: Windows10 update and a new problem
2019/10/10 14:09:12
(permalink)
It is possible to go to Microsoft Windows site, and get an identical to your Current version of windows 10 with all the patches already integrated. Download and place on a flash drive and do install of the updated version . 
KenMcC Z170 Classy K; i7-6700 CPU, Corsair CMK16GX4M2A2400C14 Seasonic SSR-360GP 360W; Samsung 950 Pro M.2 256 GB Samsung 850 Evo 500 GB SATA Samsung 850 Evo 256 GB SATA Samsung SSD 840 Series 250 GB SATA Samsung 860 EVO 1 TB SATA Windows 10 x64 Prof.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Windows10 update and a new problem
2019/10/10 14:11:57
(permalink)
gomidas
yes i know but i can not get the mouse or caps lock light. Monitor does not give blue light i se orange light. So what should i do remove the os installed drive ????
If your mouse and keyboard aren't responding when you first start the pc you clearly have a hardware problem. Dead keyboard, dead mouse, faulty usb ports, etc. Does your motherboard have a post code readout on it? If yes, what is it getting stuck on?
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Windows10 update and a new problem
2019/10/10 14:23:19
(permalink)
After you get it working again, you can pause updates for different lengths of time depending on exactly what version of Win10 you have (Home, Pro, etc.) in Windows Update. What's better is to set your internet connection as a 'Metered Connection' in the Properties of your connection..Windows will not automatically download/install updates over a Metered Connection. Then get the Show or Hide Updates tool from Micro$haft here..Run it periodically (or create a scheduled Task for it in Task Scheduler) to check for updates and hide the one, or one's, that you don't want. Run the Show or Hide Updates tool before you run the normal Windows Update. It is definately NOT recommended to completely disable Windows Update because other important/critical updates will not be installed. Long story short = Set a Metered Connection and get the Show or Hide Updates tool and hide specific/problematic update/s from the normal Windows Update..Then run the normal Windows Update after that..Works like a charm here.
post edited by bob16314 - 2019/10/10 15:04:17
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Re: Windows10 update and a new problem
2019/10/10 14:27:07
(permalink)
Sajin
gomidas
yes i know but i can not get the mouse or caps lock light. Monitor does not give blue light i se orange light. So what should i do remove the os installed drive ????
If your mouse and keyboard aren't responding when you first start the pc you clearly have a hardware problem. Dead keyboard, dead mouse, faulty usb ports, etc. Does your motherboard have a post code readout on it? If yes, what is it getting stuck on?
I see a 4C and keeps turning codes and again 4C like a loop. But I was able to boot the windows10 with unrecognized usbs to mouse and keyboard after recognizing them to pc that stopped responding too.
|
gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Re: Windows10 update and a new problem
2019/10/10 15:01:49
(permalink)
I opened the windows10 that works but before I successfully open i heard kind of horrible motor voice so i restarted again i heard thir time that sound was gone i belive that sound came from liquid pump. CPU temp is max 45Celsious. Is there anything wrong ?
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Windows10 update and a new problem
2019/10/10 15:07:39
(permalink)
gomidas
I opened the windows10 that works but before I successfully open i heard kind of horrible motor voice so i restarted again i heard thir time that sound was gone i belive that sound came from liquid pump. CPU temp is max 45Celsious. Is there anything wrong ?
Noise is not normal..Just keep an eye on it and see how it works.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Re: Windows10 update and a new problem
2019/10/10 15:35:34
(permalink)
bob16314
gomidas
I opened the windows10 that works but before I successfully open i heard kind of horrible motor voice so i restarted again i heard thir time that sound was gone i belive that sound came from liquid pump. CPU temp is max 45Celsious. Is there anything wrong ?
Noise is not normal..Just keep an eye on it and see how it works.
yea i catched something, when i open task manager that first shows 70-80% of usage that instantly reduced to 8-10. Something cause instant high cpu usage.
|
gomidas
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2017/10/05 14:52:27
- Status: offline
- Ribbons : 0
Re: Windows10 update and a new problem
2019/10/22 09:23:49
(permalink)
Windows admitted that this caused by the update and I seen a fail again then that completely removed update: https://support.microsoft...ntly-installed-updates NOTE THAT UPDATE IS 1903 ! I changed updates to manual even I did that. I got that weird update again and boot damaged again. In the end they removed the update completely. Who's will be responsible possible damage to my CLC device now ?
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Windows10 update and a new problem
2019/10/23 05:14:58
(permalink)
gomidas
Windows admitted that this caused by the update and I seen a fail again then that completely removed update: https://support.microsoft...ntly-installed-updates
NOTE THAT UPDATE IS 1903 !
I changed updates to manual even I did that. I got that weird update again and boot damaged again. In the end they removed the update completely. Who's will be responsible possible damage to my CLC device now ?
How is your AIO damaged from a windows update? Please elaborate as you even originally stated there was no hardware damage but are now saying there is? Head scratcher...
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
tattude69
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2013/04/21 15:30:52
- Location: NY
- Status: offline
- Ribbons : 5
Re: Windows10 update and a new problem
2019/10/23 08:16:08
(permalink)
just installed on my laptop and gaming rig.it went smooth no issues. Benchmarks are all within margin of error. So no increase in performance or loss of performance by updating to windows 1903 on my older hardware. i did have to turn windows fast boot back off
|