EVGA

Will be get the new BAR/support like Asus boards are doing for z490

Page: < 123 > Showing page 2 of 3
Author
Post
Essentials Only Full Version
ESchrijver
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/12/04 11:59:09
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/14 09:28:42 (permalink)
I dont have my hopes high on seeing this on the X299 Dark, it stays quiet sadly enough. 
I would be very happy to see this feature though and it would raise my faith in EVGA products into the future and as a smaller company.
#31
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/14 18:13:13 (permalink)
IT CAN happen, it is just a matter of management actually caring and saying YES YES YES. So I say that management should push it up the chain please and their software engineers getting on it coding wise firmware/assembly level programming 
#32
MasterOSkillio
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2008/04/18 21:31:58
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/15 09:39:00 (permalink)
Dang, sounds like my X99 board paired with my 3090 FTW3 that gets 60fps in Cyberpunk on a 4k screen, is considered to old to get any updates despite there being support. I guess the bump in performance depends on game, but still it would have been nice. This won't get me to upgrade though, I am waiting for Thunderbolt 4 and DDR5 before I do that.
#33
EVGA_Lee
Moderator
  • Total Posts : 4247
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/15 10:39:40 (permalink)
We are currently working on this, but no ETA at this time.
#34
Merilwen
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2012/06/27 14:32:32
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/15 11:40:21 (permalink)
EVGATech_LeeM
We are currently working on this, but no ETA at this time.




Thanks :)
#35
ssj92
FTW Member
  • Total Posts : 1417
  • Reward points : 0
  • Joined: 2008/09/18 20:56:56
  • Location: East Bay, California
  • Status: offline
  • Ribbons : 6
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/15 11:51:52 (permalink)
EVGATech_LeeM
We are currently working on this, but no ETA at this time.


That's great. Thank You 

Alienware Area-51M Laptop: Intel Core i9-9900K @ 5.3Ghz | nVidia GeForce RTX 2080
Alienware Aurora R4 Desktop: Intel Core i9 10980XE | nVidia Titan V
Alienware M18xR2 Laptop: Intel Core i7 3920XM @ 4.7Ghz | nVidia Quadro RTX 3000
Alienware X14 Laptop: Intel Core i7 12700H | nVidia GeForce RTX 3060

#36
Zapper_Weisman
New Member
  • Total Posts : 61
  • Reward points : 0
  • Joined: 2007/03/04 05:03:06
  • Location: California
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/20 18:23:25 (permalink)
EVGATech_LeeM
We are currently working on this, but no ETA at this time.


Great to hear! Thank you!
#37
davidcopher
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2021/01/22 19:38:43
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/22 19:42:45 (permalink)
EVGATech_LeeM
We are currently working on this, but no ETA at this time.


Woah, that would be amazing. Thank you. I currently own the EVGA X299 FTW K with Zotac 3090 Trinity. 👍🙏
#38
EVGA_Lee
Moderator
  • Total Posts : 4247
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 12:05:48 (permalink)
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx
#39
transdogmifier
CLASSIFIED ULTRA Member
  • Total Posts : 6116
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Orlando, Fl
  • Status: offline
  • Ribbons : 17
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 12:10:41 (permalink)
EVGATech_LeeM
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx



This is awesome to see and I don't even have one (of these motherboards)!
 

AMD Ryzen 7900x3d
Deepcool LT720
Gigabyte Aorus Elite AX X670 (Might change..don't like this board)
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
Asus ROG Swift PG43UQ 4k Monitor
eVGA 1600W Supernova T2 PSU
32GB Kingston 6000 DDR5 (2x16GB) Fury
Corsair MP600 Pro 2TB (Boot)
Corsair MP600 2TB (Games/Data)
Phanteks P500A Case
 
#40
ssj92
FTW Member
  • Total Posts : 1417
  • Reward points : 0
  • Joined: 2008/09/18 20:56:56
  • Location: East Bay, California
  • Status: offline
  • Ribbons : 6
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 12:23:07 (permalink)
EVGATech_LeeM
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx




This is why I bought an EVGA motherboard. 
 
Thank you 

Alienware Area-51M Laptop: Intel Core i9-9900K @ 5.3Ghz | nVidia GeForce RTX 2080
Alienware Aurora R4 Desktop: Intel Core i9 10980XE | nVidia Titan V
Alienware M18xR2 Laptop: Intel Core i7 3920XM @ 4.7Ghz | nVidia Quadro RTX 3000
Alienware X14 Laptop: Intel Core i7 12700H | nVidia GeForce RTX 3060

#41
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 13:44:15 (permalink)
New BIOS with resizable BAR support is out today :)
 
Edit: @EVGATech_LeeM beat me to it while I was typing it ...
#42
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 17:26:48 (permalink)
EVGATech_LeeM
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx




YOU SIR ARE AMAZING FOR MAKING THIS HAPPEN IS GREAT LETS GOOOO! Will continue to recommend EVGA motherboards for a long time now!
#43
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 17:38:18 (permalink)
ZoranC
New BIOS with resizable BAR support is out today :)
 
Edit: @EVGATech_LeeM beat me to it while I was typing it ...


Lol, your post was 2 hours after his, he beat you long before you was typing it, ;-)


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#44
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 19:19:46 (permalink)
the_Scarlet_one
Lol, your post was 2 hours after his, he beat you long before you was typing it, ;-)



Weird, his post was not showing up when I looked at the thread and started typing mine. Oh well.
#45
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 19:27:08 (permalink)
EVGATech_LeeM
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx



This article https://forums.guru3d.com...support-issues.435389/ implies that for re-size BAR to work Above 4G Decoding must be enabled and CSM disabled. It also implies that when enabling ReBAR in other manufacturer’s BIOS Above 4G and CSM are automatically updated to required values.
 
I’ve just enabled ReBAR on my X299 Dark and that did -NOT- update values for Above 4G and CSM, it left them at their defaults (of disabled and enabled, respectively).
 
Please advise what is the correct complete way to enable ReBAR support.
#46
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 20:12:40 (permalink)
ZoranC
EVGATech_LeeM
Now available - https://forums.evga.com/BIOS-Updates-for-X299-Dark-126-FTW-K-126-Micro-ATX-2-119-Micro-ATX-127-m3209309.aspx



This article https://forums.guru3d.com...support-issues.435389/ implies that for re-size BAR to work Above 4G Decoding must be enabled and CSM disabled. It also implies that when enabling ReBAR in other manufacturer’s BIOS Above 4G and CSM are automatically updated to required values.
 
I’ve just enabled ReBAR on my X299 Dark and that did -NOT- update values for Above 4G and CSM, it left them at their defaults (of disabled and enabled, respectively).
 
Please advise what is the correct complete way to enable ReBAR support.




CSM must be off. SSD must be at GPT partition. 4G decode and BAR setting must be turned on. @EVGA  will gtx 10 series and 20 series and 9 series get firmware upgrades for cards?? We could use the update on all models. Please and thank you, never stop being great with your software team and many more customers will come your way.
#47
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/25 20:26:09 (permalink)
cdc-951
CSM must be off. SSD must be at GPT partition. 4G decode and BAR setting must be turned on.
 
@EVGA  will gtx 10 series and 20 series and 9 series get firmware upgrades for cards?

 
Thank you! What is the reason, please, you ask EVGA about firmware update for 20 series? Are you implying ReBAR won't work with them without firmware update?
#48
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6916
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 76
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/26 09:31:35 (permalink)
ZoranC
cdc-951
CSM must be off. SSD must be at GPT partition. 4G decode and BAR setting must be turned on.
 
@EVGA  will gtx 10 series and 20 series and 9 series get firmware upgrades for cards?

 
Thank you! What is the reason, please, you ask EVGA about firmware update for 20 series? Are you implying ReBAR won't work with them without firmware update?


Motherboard BIOS, GPU VBIOS, and graphics driver all need to be updated to have support from what I've seen.
post edited by arestavo - 2021/01/26 09:34:38
#49
EVGA_Lee
Moderator
  • Total Posts : 4247
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/26 10:07:41 (permalink)
So, just to give more of an official answer on a couple of these questions:
 
ZoranC
 
This article https://forums.guru3d.com...support-issues.435389/ implies that for re-size BAR to work Above 4G Decoding must be enabled and CSM disabled. It also implies that when enabling ReBAR in other manufacturer’s BIOS Above 4G and CSM are automatically updated to required values.
 
I’ve just enabled ReBAR on my X299 Dark and that did -NOT- update values for Above 4G and CSM, it left them at their defaults (of disabled and enabled, respectively).
 
Please advise what is the correct complete way to enable ReBAR support.


Yes, unlike some other motherboard manufacturers, you will need to manually set a few of these yourselves.  For Resizable Bar support, you'll need to: 
  • Enable Above 4G Decoding
  • Enable Resizable Bar Support
  • Disable CSM
 
cdc-951
 
@EVGA will gtx 10 series and 20 series and 9 series get firmware upgrades for cards?? [....]

NVIDIA appears to be offering support for 30 Series cards only at this time.  If NVIDIA offers support for other GPU series, of course we'll look into it.  
 
#50
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/26 10:10:54 (permalink)
arestavo
ZoranC
cdc-951
CSM must be off. SSD must be at GPT partition. 4G decode and BAR setting must be turned on.
 
@EVGA  will gtx 10 series and 20 series and 9 series get firmware upgrades for cards?

 
Thank you! What is the reason, please, you ask EVGA about firmware update for 20 series? Are you implying ReBAR won't work with them without firmware update?


Motherboard BIOS, GPU VBIOS, and graphics driver all need to be updated to have support from what I've seen.



Thank you! After my last post I did some research and found Nvidia said they will be supporting Re-BAR only on 30 series. Which means no luck for me. Rats. It would've been nice :(
#51
ZoranC
FTW Member
  • Total Posts : 1099
  • Reward points : 0
  • Joined: 2011/05/24 17:22:15
  • Status: offline
  • Ribbons : 16
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/26 10:18:58 (permalink)
EVGATech_LeeM
So, just to give more of an official answer on a couple of these questions:
 
ZoranC
 
This article https://forums.guru3d.com...support-issues.435389/ implies that for re-size BAR to work Above 4G Decoding must be enabled and CSM disabled. It also implies that when enabling ReBAR in other manufacturer’s BIOS Above 4G and CSM are automatically updated to required values.
 
I’ve just enabled ReBAR on my X299 Dark and that did -NOT- update values for Above 4G and CSM, it left them at their defaults (of disabled and enabled, respectively).
 
Please advise what is the correct complete way to enable ReBAR support.


Yes, unlike some other motherboard manufacturers, you will need to manually set a few of these yourselves.  For Resizable Bar support, you'll need to: 
  • Enable Above 4G Decoding
  • Enable Resizable Bar Support
  • Disable CSM
 

 
Thank you for the reply and clarification! Please allow me suggestion that EVGA should, when rolling out new BIOS features, give users some guidance on what new BIOS features requires to work and how to enable it correctly (especially when that is not done automatically) as that would likely help avoid potential failures, frustration  and need for support by those that are less knowledgeable.
#52
jumblo
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2009/01/30 18:43:44
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/27 09:10:18 (permalink)
on the RX 6800XT graphics cards, there is no way to enable this. If you turn off CSM, it boots into Black and white screen at 640x480 resoultion. If you turn it on it gets stuck at error code 92. I don't think this is an EVGA problem more a problem with the card, but anyone else seen this?
#53
ESchrijver
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/12/04 11:59:09
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/28 12:23:37 (permalink)
EVGATech_LeeM
Now available -


 
post edited by ESchrijver - 2021/01/28 14:24:34
#54
ESchrijver
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/12/04 11:59:09
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/28 14:27:36 (permalink)
jumblo
on the RX 6800XT graphics cards, there is no way to enable this. If you turn off CSM, it boots into Black and white screen at 640x480 resoultion. If you turn it on it gets stuck at error code 92. I don't think this is an EVGA problem more a problem with the card, but anyone else seen this?


So with CSM on, Resizable Bar won't work? 
#55
jumblo
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2009/01/30 18:43:44
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/28 16:02:32 (permalink)
That is correct. For some reason the card has to have CSM on. There is a couple of other places that this has come up always causing bios code 92 when booting. I'm all ears if anyone has a work around. At this point I'm just biding my time for my 3080 que to hit and going to sell the 6800xt for what I paid for it and move on.
#56
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6916
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 76
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/28 19:27:54 (permalink)
jumblo
That is correct. For some reason the card has to have CSM on. There is a couple of other places that this has come up always causing bios code 92 when booting. I'm all ears if anyone has a work around. At this point I'm just biding my time for my 3080 que to hit and going to sell the 6800xt for what I paid for it and move on.


Funny enough, my system got into a total boot hang (no getting into the BIOS) after I updated my x299 FTW K and my Adaptec 8805 RAID card.

I had been booting just fine with CSM off, full UEFI mode, but the RAID card update broke that and required that CSM be enabled. It was a HUGE pain in the posterior finding that out (it's a really big and HEAVY computer), as I had to physically remove the card and set CSM on and plug it back in. Clearing CMOS actually defaults to CSM off as well. Thankfully I was able to downgrade the RAID card's firmware and it's back to working and I put in a ticket with Microsemi.

So, likely a VBIOS update will fix things for AMD users, and I'd recommend opening a ticket with them.
#57
jumblo
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2009/01/30 18:43:44
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/28 21:07:48 (permalink)
So far I'm not impressed with AMD's driver/support. I do like the card, its a beast when it's running correctly but they have a lot to learn still on drivers and support for the customer.
#58
ESchrijver
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/12/04 11:59:09
  • Status: offline
  • Ribbons : 0
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/29 03:03:59 (permalink)
jumblo
That is correct. For some reason the card has to have CSM on. There is a couple of other places that this has come up always causing bios code 92 when booting. I'm all ears if anyone has a work around. At this point I'm just biding my time for my 3080 que to hit and going to sell the 6800xt for what I paid for it and move on.


This is a bummer, hopefully there is a fix possible.


#59
kram36
The Destroyer
  • Total Posts : 21477
  • Reward points : 0
  • Joined: 2009/10/27 19:00:58
  • Location: United States
  • Status: offline
  • Ribbons : 72
Re: Will be get the new BAR/support like Asus boards are doing for z490 2021/01/29 04:05:12 (permalink)
jumblo
That is correct. For some reason the card has to have CSM on. There is a couple of other places that this has come up always causing bios code 92 when booting. I'm all ears if anyone has a work around. At this point I'm just biding my time for my 3080 que to hit and going to sell the 6800xt for what I paid for it and move on.


EVGATech_LeeM
So, just to give more of an official answer on a couple of these questions:
 
ZoranC
 
This article https://forums.guru3d.com...support-issues.435389/ implies that for re-size BAR to work Above 4G Decoding must be enabled and CSM disabled. It also implies that when enabling ReBAR in other manufacturer’s BIOS Above 4G and CSM are automatically updated to required values.
 
I’ve just enabled ReBAR on my X299 Dark and that did -NOT- update values for Above 4G and CSM, it left them at their defaults (of disabled and enabled, respectively).
 
Please advise what is the correct complete way to enable ReBAR support.


Yes, unlike some other motherboard manufacturers, you will need to manually set a few of these yourselves.  For Resizable Bar support, you'll need to: 
  • Enable Above 4G Decoding
  • Enable Resizable Bar Support
  • Disable CSM

#60
Page: < 123 > Showing page 2 of 3
Jump to:
  • Back to Mobile