EVGA

Hot!Updating Marvell Controller Driver For Sata 3

Author
Post
Essentials Only Full Version
JLewis187
iCX Member
  • Total Posts : 498
  • Reward points : 0
  • Joined: 2008/05/15 02:24:29
  • Status: offline
  • Ribbons : 0
2012/05/30 19:19:42 (permalink)
I use board E767 (X58 Sli3).
 
Make sure you update the bios of Marvell using Sata 6 ISO Offered by EVGA - 1701 (has to be 1701).
Make sure your bios is under AHCI - IDE causes problems and this driver is not for IDE mode.
 
The driver you will be using is
Marvell MV-91xx (88SE91xx) Ahci/Raid Controller
Drivers Version 1.2.0.1016 WHQL (Xp/Vista/7)
 

Don't download and use 1.2.0.1019 - It's not the most updated, its simply not for your Hardware ID.
Only Download 1.2.0.1016.  When You install you will simply extract and Run drvsetup.exe
Restart your computer.
 
After your computer restarts go to Device Manger - Storage Controllers - Right Click Marvell 91xx SATA 6G Controller and click update - Search Automatically for updated driver software, Make sure it is 100% up to date.
 
next in Device Manger open System Devices and right click Marvell 91xx Config Device and again click update, Search automatically for the best.
 
You are now set using the Latest Marvell Sata Controller Driver.  Thanks for reading - JL
 
post edited by JLewis187 - 2012/05/30 19:57:26
#1

2 Replies Related Threads
    Hawaiiboi808
    FTW Member
    • Total Posts : 1163
    • Reward points : 0
    • Joined: 2009/08/08 21:58:28
    • Location: Standing right here in your face...
    • Status: offline
    • Ribbons : 6
    Re:Updating Marvell Controller Driver For Sata 3 2012/05/31 01:58:25 (permalink)
    1.2.0.1019 is a little herp derp in my opinion...

    Profile Update: 9/19/2013. 
    i7 4960x IVB-E w/ EK Supremacy Copper @ 4.4 Ghz, w/ Prolimatech PK3 TIM, Avg Idle Temp @ 34 deg C, load @ 46 deg C; Vcore: 1.02v.
    x79 ASrock Extreme 11.
    65.5 GB Corsair Platinum 2133mhz @  9-9-9-24 0.6667Ghz (not OC).
    1 Asus ROG Ares II, 7970x2, 819 of 999  W/ Lonovo Display Port Cable; AMD Cat Beta 13.10. 
    Creative Sound Blaster Recon 3Di, Monster Inc Toslink, Asus Essence One DAC, Beyerdynamic Tesla 1.
    Corsair AX 1200 Watt PSU.
    Win7 Ultimate x64.
    Asus VG278 LED Monitor.
    OCZ Vertex 0.24 TB S3, PCIe OCZ RevoDrive 3 x2 0.48 TB, Segate 2TB HDD,  WD VelociRaptor 0.6TB S3 HDD, OCZ Vertex 4 0.5 TB, 50 GB AsRock ScanDisk Drive, Samsung 840 500 GB. 
    Madcatz Cyborg MMO7.
    Corsair K95 Mechanical Keyboard.
    #2
    kleinbaas
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2024/11/24 14:55:06
    • Status: offline
    • Ribbons : 0
    Re: Updating Marvell Controller Driver For Sata 3 2024/11/24 15:00:35 (permalink)
    This helped me so much. Thanks!
    I've just installed the pce6sat-m01 SATA card on an old HP dc6700 with Windows XP. It didn't work as XP is no longer supported and it wouldn't find the drivers, but your post pointed me in the right direction and I found the drivers on Station Drivers (look for Marvell MV-91xx/92xx SATA 6G Controller Version 1.2.0.1046 WHQL). Run the setup and restart. All working from there. Thanks again.
    #3
    Jump to:
  • Back to Mobile