EVGA

Those of you with 4090's be careful with the 12pin adapter that comes with cards

Page: < 1234 Showing page 4 of 4
Author
Yeh Ximin
New Member
  • Total Posts : 32
  • Reward points : 0
  • Joined: 2021/12/18 20:30:08
  • Status: offline
  • Ribbons : 0
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 05:28:18 (permalink)
dragomirc
Yeh Ximin
TLDR: the rtx4090 sucks and is just a matter of time the 12V cable gonna worn out and melt?
Nvidia still keeping their silence

And you must be a leading NASA engineer, right?
Change the dealer. 


I am preordering one, if it is that bad and even those native cables melts, whats the point of getting one? to be stucked in another un-ending RMA loop? like with EVGA?
post edited by Yeh Ximin - 2022/11/06 06:08:40
#91
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 06:31:39 (permalink)
I guarantee NVidia puts this on PCI-SIG and says “we were operating within the specifications”.

I am beginning to wonder if this is transient spikes lasting longer than anticipated causing the heat to build up rather than dissipating. Atx3.0 is supposed to allow for up to 200% transient spikes, if I am not mistaken or remembering incorrectly. That would build up heat on the connection as it would be a weak point in the connector with the smallest contact patch.
#92
kraade
CLASSIFIED Member
  • Total Posts : 2363
  • Reward points : 0
  • Joined: 2020/10/18 09:05:52
  • Location: Georgia
  • Status: offline
  • Ribbons : 7
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 12:26:45 (permalink)
the_Scarlet_one
I guarantee NVidia puts this on PCI-SIG and says “we were operating within the specifications”.

I am beginning to wonder if this is transient spikes lasting longer than anticipated causing the heat to build up rather than dissipating. Atx3.0 is supposed to allow for up to 200% transient spikes, if I am not mistaken or remembering incorrectly. That would build up heat on the connection as it would be a weak point in the connector with the smallest contact patch.

Except the 4090 is running much flatter power (less transient) and had at many times, pull less power than a 3090 TI under the same graphics load test . 
got to be a few pin sockets out of spec, and this looks to be extremely rare . 
#93
emmett
SSC Member
  • Total Posts : 513
  • Reward points : 0
  • Joined: 2008/03/30 23:42:22
  • Status: offline
  • Ribbons : 2
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 14:56:26 (permalink)
After seeing Jayztwocents video I just did this off the bat. (Before all the melting issues)
 
What is the best cable to get? corsair seems to have pulled the one they had.
 
https://imgur.com/YS1DHeT
 

https://imgur.com/phRBvea
post edited by emmett - 2022/11/06 19:19:36

Currently using
Gigabyte Z370 Aorus Gaming 7
 
EVGA 2080 TI KingPin
Intel 9900K
GSkill 3200
EVGA G2 1300 
#94
tsbond
iCX Member
  • Total Posts : 273
  • Reward points : 0
  • Joined: 2017/02/10 20:23:39
  • Status: offline
  • Ribbons : 0
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 18:27:42 (permalink)
So these can run stock with only 3 PCIe power connections? Just checking didn't want to start a new thread for question :)
#95
TrekCZ
iCX Member
  • Total Posts : 417
  • Reward points : 0
  • Joined: 2008/12/03 03:02:38
  • Status: offline
  • Ribbons : 1
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/06 22:48:28 (permalink)
Yes, card can run with 3 PCIe connectors and this means that it must not draw more than 450W = power limit slider is at 100% max and cannot go more. Basic 4090 models come with 3 cable adapters, those look much better than 4 cable adapters, cables are thick and overall construction of that adapter looks reliable.
 
#96
kraade
CLASSIFIED Member
  • Total Posts : 2363
  • Reward points : 0
  • Joined: 2020/10/18 09:05:52
  • Location: Georgia
  • Status: offline
  • Ribbons : 7
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 04:45:58 (permalink)
The 3090 ti 3 x cable doesn't work with the 4090, it doesn't include the 4 sense pins.
#97
TrekCZ
iCX Member
  • Total Posts : 417
  • Reward points : 0
  • Joined: 2008/12/03 03:02:38
  • Status: offline
  • Ribbons : 1
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 05:03:28 (permalink)
Nobody wrote that 3090 ti cables work with 4090, if you are replying to my post.
 
Some basic 4090 models have 3 cable adapters (with sense pins of course). Those adapters (3 cables with sense pins) were originally presented in many screenshots and even trailers on youtube (e.g. MSI) and were later reshoot to 4 cable adapters.
#98
zippytek
FTW Member
  • Total Posts : 1185
  • Reward points : 0
  • Joined: 2020/10/06 17:25:35
  • Status: offline
  • Ribbons : 9
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 06:48:56 (permalink)
looks like the HOF OC Lab edition uses twin 4x8pin to 12VHPWR adapters. 3 power supply territory on LN2
#99
atfrico
Omnipotent Enthusiast
  • Total Posts : 12753
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 11:02:13 (permalink)
Guys dont take shortcuts on the cable for the 4090. That is the risk of upgrading to the new hardware

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
scipher99
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2020/11/10 22:53:43
  • Status: offline
  • Ribbons : 0
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 15:10:28 (permalink)
Even custom cables are reporting having problems too now.
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/07 16:54:39 (permalink)
All in due time, NVidia will hardlock these cards to 450w maximum through GPU driver updates, to stop the connectors from melting.. they are going to blame PCI-SIG since NVidia is “within specs”. I don’t doubt this in the least. NVidia will never own up to their own issues since they are the ones that pushed this connector.
post edited by the_Scarlet_one - 2022/11/07 21:38:35
KarmNelis
Superclocked Member
  • Total Posts : 239
  • Reward points : 0
  • Joined: 2017/07/10 04:30:08
  • Status: offline
  • Ribbons : 2
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/13 22:46:50 (permalink)
Just slot the connector all the way in. 


 


CPU - Intel 8700K - 5.1GHz core, 5.0GHz cache, 1.37v
GPU - EVGA FTW3 1080Ti SLI - 2.0GHz core, 12GHz memory
Motherboard - Asus Maximus X Hero
Memory - Corsair Dominator 4x16GB - 3000MHz default XMP 15-17-17-35
PSU - EVGA 1600T2
Fire Strike 36838 Extreme 25250 Ultra 14464
bavor
SSC Member
  • Total Posts : 994
  • Reward points : 0
  • Joined: 2008/02/20 21:24:43
  • Status: offline
  • Ribbons : 6
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/20 17:35:07 (permalink)
It appears that the melting/burned cable issue is mostly user error with a design that doesn't have a good audible click when fully inserted.  Its actually such a tiny number of people with the issue that I'm impressed by the mass hysteria that was caused by a handful of people.
 
https://www.youtube.com/watch?v=ig2px7ofKhQ
 
Hoggle
EVGA Forum Moderator
  • Total Posts : 10102
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/20 22:25:05 (permalink)
KarmNelis
Just slot the connector all the way in. 


 



It might be good for people to take a photograph and zoom in to make sure that everything is seated correctly. Sometimes it’s easier to see a flaw when it’s 300% zoomed in over just looking at it with your eyes.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
KarmNelis
Superclocked Member
  • Total Posts : 239
  • Reward points : 0
  • Joined: 2017/07/10 04:30:08
  • Status: offline
  • Ribbons : 2
Re: Those of you with 4090's be careful with the 12pin adapter that comes with cards 2022/11/21 12:08:37 (permalink)
It is more like the room is too dim to see. The light is also blocked by the case.
A flashlight is necessary to check the connectors even with all the other lights turned on.
 

CPU - Intel 8700K - 5.1GHz core, 5.0GHz cache, 1.37v
GPU - EVGA FTW3 1080Ti SLI - 2.0GHz core, 12GHz memory
Motherboard - Asus Maximus X Hero
Memory - Corsair Dominator 4x16GB - 3000MHz default XMP 15-17-17-35
PSU - EVGA 1600T2
Fire Strike 36838 Extreme 25250 Ultra 14464
Page: < 1234 Showing page 4 of 4
Jump to:
  • Back to Mobile